User's Manual
Table Of Contents
- Table of Contents
- TH53TwinPlex™ Omnidirectional Headset
- General Description
- Care and Maintenance
- Adjusting the Headband and Microphone
- Adjusting the Headband and Microphone
- Attaching the Windscreen
- Attaching the Windscreen
- Using the Collar Clip
- Accessories
- Accessories
- Replacement Parts
- DescriptionBlackTanCocoa1Foam WindscreenRPM40WS/BRPM40WS/TRPM40WS/C2Frequency Caps, Flat ResponseRPM40FC/BRPM40FC/TRPM40FC/CFrequency Caps, Presence ResponseRPM40PC/BRPM40PC/TRPM40PC/C3Microphone Boom Arm and Cable Assembly, Lemo ConnectorRPM53B/O-LEMORPM53T/O-LEMORPM53C/O-LEMOMicrophone Boom Arm and Cable Assembly, MTQG ConnectorRPM53B/O-MTQGRPM53T/O-MTQGRPM53C/O-MTQGMicrophone Boom Arm and Cable Assembly, No ConnectorRPM53B/O-NCRPM53T/O-NCRPM53C/O-NCMicrophone Boom Arm and Cable Assembly, MicroDot ConnectorRPM53B/O-MDOTRPM53T/O-MDOTRPM53C/O-MDOT4Cable FlexRPM53B-CFRPM53T-CFRPM53C-CF5Cable Headset ClipRPM53B-CCRPM53T-CCRPM53C-CC6Headset FrameRPM53B-HFRPM53T-HFRPM53C-HF7Collar ClipRPM40STC/B (Black), RPM40STC/W (White)RPM40STC/TRPM40STC/C8ConnectorWA430 (MTQG), WA416 (LEMO)9Threaded TA4F/MTQG CollarWA44510XLR PreamplifierRPM400TQG (TA4F to XLR), RPM400LEMO (LEMO to XLR)11Clear Earhook SleeveRPM50ESStorage CaseRPM50CASE
- DescriptionBlackTanCocoa1Foam WindscreenRPM40WS/BRPM40WS/TRPM40WS/C2Frequency Caps, Flat ResponseRPM40FC/BRPM40FC/TRPM40FC/CFrequency Caps, Presence ResponseRPM40PC/BRPM40PC/TRPM40PC/C3Microphone Boom Arm and Cable Assembly, Lemo ConnectorRPM53B/O-LEMORPM53T/O-LEMORPM53C/O-LEMOMicrophone Boom Arm and Cable Assembly, MTQG ConnectorRPM53B/O-MTQGRPM53T/O-MTQGRPM53C/O-MTQGMicrophone Boom Arm and Cable Assembly, No ConnectorRPM53B/O-NCRPM53T/O-NCRPM53C/O-NCMicrophone Boom Arm and Cable Assembly, MicroDot ConnectorRPM53B/O-MDOTRPM53T/O-MDOTRPM53C/O-MDOT4Cable FlexRPM53B-CFRPM53T-CFRPM53C-CF5Cable Headset ClipRPM53B-CCRPM53T-CCRPM53C-CC6Headset FrameRPM53B-HFRPM53T-HFRPM53C-HF7Collar ClipRPM40STC/B (Black), RPM40STC/W (White)RPM40STC/TRPM40STC/C8ConnectorWA430 (MTQG), WA416 (LEMO)9Threaded TA4F/MTQG CollarWA44510XLR PreamplifierRPM400TQG (TA4F to XLR), RPM400LEMO (LEMO to XLR)11Clear Earhook SleeveRPM50ESStorage CaseRPM50CASE
- Replacement Parts
- Threaded Mount Instructions
- Wiring and Termination
- Wiring and Termination
- Specifications
- Certifications
- Certifications
Shure Incorporated
15/17
Self-Noise, A-Weighted, Equivalent Acoustical
24.5 dB SPLA
Signal-To-Noise Ratio
69.5 dB
Output Clipping Level
3.0 dBV,1 kHz at 1% THD, typical
Maximum SPL
142.0 dB SPL,1 kHz at 1% THD, typical
Dynamic Range
117.5 dB typical
Microphone Current Draw
120 to 240 µA, typical
Bias Voltage
Recommended Operating Voltage
5 V DC
Housing
Molded ABS
Polarity
MTQG
Positive pressure on diaphragm produces positive voltage
on pin 3 with respect to pin 1
LEMO, NC, MDOT
Positive pressure on diaphragm produces negative voltage
on pin 3 with respect to pin 1.
Cable Diameter
1.6 mm
Cable Length
MTQG, LEMO, MDOT 66 in. (1.67 m)
NC 96 in. (2.43 m)
Net Weight
Boom arm with cable 12.0 g(0.42 oz.)
Headset frame 6.0 g(0.21 oz.)
All specifications measured with a 48 Vdc phantom power supply. The microphone operates at lower voltages, but with slight
ly decreased headroom and sensitivity.
1 Pa=94 dB SPL
[3]
[4]
[1]
[2]