User's Manual

ManualsBrandsShure ManualsMicrophones for WirelessTwinPlex TL48 Omnidirectional Lavalier Microphone

Table Of Contents

Shure Incorporated

17/22

•

TA5F Wiring for Lectrosonics Bodypacks (Servo Biased Wiring)

Series

Cable

Con

struc

tion

Electri

cal De

sign

Polari

Re

place

ment

Con

nector

For Use

With

Wiring Line Art (From Solder Side)

TL46-

MTQG,

TL47-

MTQG,

TL48-

MTQG

1.6mm

cable

with 2

con

duc

tors, 2

shield

wires

and

shield

3-Wire

(Source

Follow

er)

Posi

tive

with

re

spect

ground

WA435

Lectrosonics

TA5F body

packs

Red wire: Bias(3)

Blue wire: Audio(5)

Shield wire: Ground(1)

Shield: Ground(Shell)

Jumper between 2 and

TL46-

LEMO,

TL47-

LEMO,

TL48-

LEMO,

TL47-

NC,

TL48-

1.6mm

cable

with 2

con

duc

tors, 2

shield

wires

and

shield

2-Wire

(Com

mon

Source)

Nega

tive

with

re

spect

ground

WA435

Lectrosonics

TA5F body

packs

Red wire: Audio/

Bias(3)

Blue wire: Not con

nected

Shield wire: Ground(1)

Shield: Ground(Shell)

Jumper between 2 and

Hirose Wiring for Sony Bodypacks

Notes:

When using TwinPlex mics with Sony Hirose 4pin bodypacks, Shure recommends purchasing Shure –MTQG versions

and not –NC versions. This facilitates an easier termination due to the lack of circuitry required in Shure 3wire/MTQG

TA4F products.

Due to the thin cable on TwinPlex and the large boot on Hirose connectors, heat shrink may be required to build up the ca

ble under the boot where the crimp connection is made and where the cable exits the boot

The TwinPlex Microdot (-MDOT) version can be used with 4-pin Hirose adapters from DPA (DPA part # DAD6008)