ULX-D ULX-D Digital Wireless Microphone System ©2011 Shure Incorporated 27A16234 (Rev.
ii
IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. READ these instructions. KEEP these instructions. HEED all warnings. FOLLOW all instructions. DO NOT use this apparatus near water. CLEAN ONLY with dry cloth. DO NOT block any ventilation openings. Install in accordance with the manufacturer’s instructions. DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
iv
중요 안전 지침 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 이 지침을 정독해 주십시오. 이 지침을 잘 보관해 주십시오. 모든 경고를 유의하십시오. 모든 지침을 준수하십시오. 이 기기를 물 가까이에 두고 사용하지 마십시오. 마른 수건으로만 닦으십시오. 통풍구를 막지 마십시오. 제조업체의 지침에 따라 설치하십시오. 난방기, 방열 조절기, 스토브, 기타 열을 발산하는 기기 (앰프포함) 근처에 설 치하지 마십시오. 안전을 위해 유극 또는 접지 타입의 플러그를 반드시 사용하십시오. 유극 유형 의 플러그에는 폭이 다른 핀이 있습니다. 접지형 플러그에는 두 개의 핀과 하 나의 접지 단자가 있습니다. 넓은 핀이나 접지 단자는 사용자의 안전을 위한 것입니다. 제공된 플러그가 콘센트에 맞지 않으면 전기 기사에게 문의하여 구 형 콘센트를 교체하십시오. 전원 코드는 밟히지 않도록 주의하고 특히 전원 플러그 사이, 접속 소켓 및 기 기에서 나오는 부분에 전원 코드가 끼이 않도록 보호하십시오.
vi
vii
General Description Shure ULX-D Digital Wireless offers uncompromising audio quality and RF performance, with intelligent, encryption-enabled hardware and advanced rechargeability options for professional sound reinforcement. A breakthrough in wireless audio quality, Shure digital processing enables ULX-D to deliver the purest reproduction of source material ever available in a wireless system.
Quickstart Instructions 1 2 a a b control 45° 12V OUT 150 mA line mic 15V 0.6A antenna . B power mic / line inst / aux control power SCAN SCAN sync push SCAN push push power www.shure.com EXIT power mic / line inst / aux line mic antenna . A power mic / line inst / aux ULXD4 push !! ! G:01 CH:21 485.775 MHz Rssi: -118 dBm EXIT www.shure.com ULXD4 www.shure.com 12V OUT 150 mA 15V 0.6A antenna . B 12V OUT 150 mA antenna . B line mic power 15V 0.
Receiver Front Panel ① Sync Button Press the sync button while the receiver and transmitter IR windows are aligned to transfer settings from the receiver to the transmitter 7 ④ Encryption Icon Illuminates when AES-256 encryption is activated: Utilities > Encryption ⑤ LCD Panel Displays settings and parameters gain power OL ENTER Digital Wireless Receiver EXIT SCAN sync 1 3 2 push 6 5 4 10 11 12 13 ⑩ RF Signal Strength LEDs Indicate the RF signal strength from the transmitter: • Amber =
Transmitters ⑪ ①② ③ ⑨ ULXD1 ④ ⑤ ⑥ ⑦ ④ ⑤ ② ⑥ ULXD2 on ⑦ ⑧ ⑧ ⑩ ① Power LED • Green = unit is powered on • Red = low battery or battery error (see Troubleshooting) • Amber = power switch is disabled ② On/Off Switch Powers the unit on or off ③ TA4M Input Jack Connects to a 4-Pin Mini Connector (TA4F) microphone or instrument cable ④ LCD Display: View menu screens and settings.
Home Screen 8 6 1 1 7 5 2 3 6 2 4 3 4 5 Receiver Transmitter ① Receiver Information Use UTILITIES > HOME INFO to change the home screen display ① Transmitter Information Scroll ▲▼ at the home screen to change the display ② Gain Setting -18 to +42 dB, or Mute ② Power Lock Indicator Indicates power switch is disabled ③ Mic.
push control RF audio A B gain power OL ULXD4 OL ENTER Digital Wireless Receiver EXIT sync SCAN push Batteries The transmitter runs on two AA batteries or the Shure SB900 rechargeable battery. 3 a b on c on on ULXD2 ULXD2 ULXD2 on on AA SB900 ULXD1 ULXD1 4 AA Batteries a b Rechargeable Battery Shure SB900 A 5-segment icon on the receiver and transmitter menu screens indicates battery charge.
Setting Gain Adjust gain at the receiver so that the average signal levels are solid green and yellow with peaks that flicker the red overload LED. Attenuate the gain if the signal overloads repeatedly. Set the XLR output to line-level when possible to optimize sound system noise performance. System Gain Control The gain control on the receiver sets the audio signal level for the entire system. This allows adjustments to be made during a live performance.
Scan and Sync EXIT Use this procedure to tune a receiver and transmitter to the best open channel. control RF audio AB gain power OL ULXD4 OL ENTER Digital Wireless Receiver SCAN EXIT SCAN sync push Important! Before you begin: Turn off all transmitters for the systems you are setting up. (This prevents them from interfering with the frequency scan.
Manual Frequency Selection To manually adjust group, channel or frequency, use the RADIO > SET FREQ menu. Device ID Name the receiver's Device ID to easily identify it through the network or in Wireless Workbench: UTILITIES > NETWORKING > Dev. ID Networking Receivers The receiver uses an Ethernet connection to network with other components. For automatic network configuration, use a DHCP enabled Ethernet switch such as the Shure AXT620.
Locking Controls and Settings Use the LOCK feature to prevent accidental or unauthorized changes to the hardware. Attempting to access a locked feature will display the following message: System Reset Use this feature to overwrite current settings with saved or factory default settings. Save a System Preset To save the current receiver setup as a new preset: UTILITES > SYSTEM RESET > SAVE > CREATE NEW PRESET. Receiver Menu path: UTILITIES > LOCK MENU: All menu paths are inaccessible.
Firmware Firmware is embedded software in each component that controls functionality. Periodically, new versions of firmware are developed to incorporate additional features and enhancements. To take advantage of design improvements, new versions of the firmware can be uploaded and installed using the Firmware Update Manager tool available in Shure's Wireless Workbench® (WWB) software. Software is available for download from http://www.shure.com/wwb.
ULXD Specifications RF Carrier Frequency Range 470–814 MHz, varies by region (See Frequency Range and Ouput Power table) Working Range 100 m (330 ft) Note: Actual range depends on RF signal absorption, reflection and interference. RF Tuning Step Size 25 kHz, varies by region Image Rejection >70 dB, typical RF Sensitivity -98 dBm at 10-5 BER Latency <2.
ULXD1 Gain Offset Range 0 to 21 dB (in 3 dB steps) Battery Type Shure SB900 Rechargeable Li-Ion or LR6 AA batteries 1.5 V Battery Runtime @ 10 mW Shure SB900: alkaline: >12 hours 11 hours See Battery Runtime Chart Dimensions 86 mm x 66 mm x 23 mm (3.4 in. x 2.6 in. x 0.9 in.) H x W x D Weight 142 g (5.0 oz.
Tables and Diagrams TA4M Connector 500 Ω 500 Ω 1µF 910k Ω Z Active Load 100 µF 440 pF Pad 12dB 5 V DC Ground Bias Voltage Audio Input Active Load Audio Input Ground 22 µF instrument/ aux 50 Ω 50 Ω 22 µF 22 µF -30 dB 50 Ω 22 µF Battery Runtime Frequency Range and Transmitter Output Power Battery Type 1 mW 10 mW 20 mW SB900 >12 hours >12 hours >8 hours Alkaline <11 hours <11 hours <5.5 hours NiMH <11 hours <11 hours <8 hours Li-primary 12.5-18 hours 12.5-18 hours 9.
Furnished Accessories Optional Accessories All Systems Receiver ULXD4 Power Supply 95-17019 1/2 Wave Antenna (2) 95T9279 2' BNC Cable (2) 95K2035 BNC Bulkead Adapters (2) 95A8994 Rackmount Kit (1) 90AZ8100 5' Ethernet Cable (1) 95A16941 AA Alkaline batteries (2) 80B8201 Rackmount Bracket, Short 53A8611 Rackmount Bracket, Long 53A8612 Link Bar 53B8443 Handheld Systems Handheld Transmitter ULXD2 Cartridge see options below Microphone Clip 95T9279 Zipper Bag 95B2313 AA Battery A
Certifications ULXD1, ULXD2, ULXD4 Meets essential requirements of the following European Directives: • Low Voltage Directive 2006/95/EC • R&TTE Directive 99/5/EC • WEEE Directive 2002/96/EC, as amended by 2008/34/EC • RoHS Directive 2002/95/EC, as amended by 2008/35/EC Note: Please follow your regional recycling scheme for electronic waste Conforms to the relevant requirements of regulation (EC) No.278/2009, for low voltage external power supplies.
FREQUENCIES FOR EUROPEAN COUNTRIES ULXD-G51 470 - 534 MHz, max. 20 mW Country Code Code de Pays Codice di paese Código de país Länder-Kürzel A, B, BG, CH, CY, CZ, D, EST F, GB, GR, H, I, IS, L, LT NL, P, PL, S, SK, SLO DK, FIN, M, N Frequency Range Gamme de frequences Gamme di frequenza Gama de frequencias Frequenzbereich 470 - 534 MHz * 470 - 534 MHz * 470 - 534 MHz * * All other countries * HR, E, IRL, LV, RO, TR * ULXD-H51 534 - 598 MHz, max.
United States, Canada, Latin America, Caribbean: Shure Incorporated 5800 West Touhy Avenue Niles, IL 60714-4608 USA Phone: 847-600-2000 Fax: 847-600-1212 (USA) Fax: 847-600-6446 Email: info@shure.com www.shure.com ©2011 Shure Incorporated Europe, Middle East, Africa: Shure Europe GmbH Jakob-Dieffenbacher-Str. 12, 75031 Eppingen, Germany Phone: 49-7262-92490 Fax: 49-7262-9249114 Email: info@shure.