ULX Wireless System Shure ULX Wireless ULX sans fil de Shure Sistema inalámbrico ULX de Shure Sistema ULX Sem Fio da Shure ©2014 Shure Incorporated 27A15788 (Rev.
ULX System Components All systems include either a ULXS4 Standard Diversity Receiver or ULXP4 Professional Diversity Receiver. Handheld systems include a choice of interchangeable microphone heads. ULXP4 receivers include rack-mounting hardware. SM58, SM86, SM87A, Beta 58, Beta 87C UA507 FULL RACK MOUNT HARDWARE Bodypack systems include a choice of lavalier, headworn, or instrument microphones. Guitar systems include a 1/4” to mini 4-pin cable.
Rack Installation Rackmount Options The following shows rackmounting options for one to four receivers and lists the required accessories. 6 mm (1/4”) 1 x UA506 1 x UA600 2 x UA820 1 x UA440 1 x UA507 4 x UA820 ULXP4 DUAL 1 x UA444 1 x UA507 4 x UA506 1 x UA444 2 x UA507 Power ULXP4, ULXS4 Power switch Power Connector Connect using the supplied AC adapter or certified 14–18 Vdc (550 mA) replacement supply.
Single System If you encounter wireless interference, perform a channel scan on the receiver and use the selected channel. You usually do not need to change the group. Multiple Systems To maximize performance, set all wireless systems to different channels from the same group. These channels are selected to work well together. Follow these steps when using group and channel scan with multiple systems. 1. Power off all system transmitters.
Wireless Indicators RF Indicator Antenna Indicator Note: When the antenna and battery indicators are illuminat- ULXP4 Indicates wireless activity over the selected channel. ed, the RF indicator shows signal strength from the transmitter. Otherwise, it is showing interference from another source. Select a different channel. ULXP4 This indicator shows which antenna is receiving the strongest signal from the transmitter. ULXS4 TV For models sold in the United States only.
Transmitter Gain Locking the Receiver (ULXP4 Only) For best audio quality, adjust transmitter gain so only the green and yellow TX AUDIO LEDs flicker. (Occasional illumination of the red LED is okay.) This feature prevents accidental setting changes. Green = nominal Yellow = peak Red = overload ULX1 ULXP4 ULX2 lock volume lock frequency Audio Input Meter Unlocking Hold the SET button while turning the control wheel left, right, left. ULXP4 ULX1 1.
Troubleshooting No power: Check battery and power supply connections and voltage. Check the power switch on the transmitter. The LCD displays "E0 00" or similar code: Exit master list mode by holding the SET button for ten seconds. Can't turn off or change settings on the transmitter or receiver: The interface is locked. See the section on locking the interface. No audio: If the antenna and battery indicators do not appear on the receiver, then it is not receiving a signal from the transmitter.
Certifications Important Product Information This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. LICENSING INFORMATION This product meets the Essential Requirements of all relevant European directives and is eligible for CE marking. The CE Declaration of Conformity can be obtained from: www.shure.
Specifications RF Carrier Range 470,000–865,000 MHz varies by region Working Range 100 m (300 ft) typical Note: Actual range depends on RF signal absorption, reflection and interference. Audio Frequency Response 25 Hz – 15 kHz, ±2 dB Note: Dependent on microphone type Modulation ±38 kHz deviation compressor-expander system with pre- and de-emphasis Dynamic Range >100 dB, A-weighted Image Rejection 80 dB, typical RF Sensitivity 1.
ULX FREQUENCIES FOR EUROPEAN COUNTRIES ULX-G3E 470 - 506 MHz, max. 30 mW ULX R4 784–820 MHz max.
ULX SYSTEM COMPATIBILITY GUIDE FOR FREQUENCY BAND G3E (470–506 MHz) Channel Group 1 Group 2 Group 3 Group 4 Group 5 Group 6 Full Range Full Range Full Range France France France France max. # of compatible frequencies max. # of compatible frequencies max. # of compatible frequencies preferred: preferred: preferred: preferred: (option 1) (option 2) (option 3) User Group A User Group A User Group A User Group B 470.775 471.525 473.350 474.875 476.150 476.850 477.775 480.000 481.
ULX SYSTEM COMPATIBILITY GUIDE FOR FREQUENCY BAND K2E (606-642 MHz) Channel 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Channel 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Group 1 Group 2 Group 3 Group 4 Group 5 Group 6 Group 7 Group 8 Group 9 Full Range Full Range Full Range Full Range Full Range Full Range U.K. preferred: U.K. preferred: U.K. preferred: max. # of max. # of max. # of max. # of max. # of max. # of TV ch. 38 TV ch. 38 TV ch.
ULX SYSTEM COMPATIBILITY GUIDE FOR FREQUENCY BAND X7 (925 - 937.5 MHz) CHANNEL Group 1 Group 2 Group 3 Group 4 Group 5 Group 6 Group 7 Group 8 Group 9 more freqs. more freqs. more freqs. more freqs. more freqs. more freqs. more freqs. more freqs. more freqs. 1 925.175 925.150 925.775 925.325 925.450 925.225 925.125 925.275 925.150 2 926.325 926.200 926.475 926.125 926.000 926.275 925.850 926.275 926.050 3 926.925 927.700 927.550 926.600 927.050 926.950 926.
