Datasheet

Product Specifications
www.shuttle.eu
Shuttle Computer Handels GmbH
Fritz-Strassmann-Str. 5
25337 Elmshorn | Germany
Tel. [phone]
Fax [phone]
[e-mail]
Pa
g
e 7 21 Au
g
ust 2014
© 2014 by Shuttle Computer Handels GmbH (Germany). All information subject to change without notice. Pictures for illustration purposes only.
E
nvironmental
Specifications
Operating temperature range: 0~45 °C
Relative humidity, non-condensing: 10~95%
Conformit
y
Certifications
CE, FCC, C-TICK, CCC, BSMI, CB, ErP Lot6, R&TTE
[1] Notice: all USB ports combined provide a maximum current of 500 mA. If the USB devices connected exceed
this limit, external power supplies are required.
[2] Wake-on-LAN (WOL) is an Ethernet computer networking standard that allows a computer to be turned on or
awakened by a network message. This message is a specially designed packet called a magic packet, which
contains the MAC address of computer to be woken up. A MAC address (media access control address) is a
unique identifying number built into each network interface card ("NIC"), that enables it to be uniquely recognized
and addressed on a network. You will find the MAC address of DSA2LS on a sticker attached to the bottom of the
chassis.
[3] The restore button (equally to "Volume Down") can be accessed through a small hole in the back panel. Similar
to other Android devices, the restore button can be pressed simultaneously with the power button to enter the
Android system recovery menu. This allows for rebooting the system, performing a firmware update (image) or
setting the system back to its factory settings. Please be aware of the latter will delete any personal information
and remove any custom-installed programs. We therefore highly recommend to backup any personal data before
starting this procedure. Please refer to the FAQ section on the Shuttle website for additional information.
[4] Use its Mini-B USB connector to connect the DSA2LS to a PC and to access the available Flash memory as an
external drive. To do so, a USB adapter cable with two connectors, standard-A to mini-B, is required.
Top view: Shuttle DSA2LS without chassis cover