Datasheet
Product Specifications
w w w . s h u t t l e . e u
Shuttle C omputer H andels G m bH
Fr itz -St rassman n-S tr. 5
25337 Elm shorn | German y
Tel. +49 (0) 4121-47 68 60
Fax +4 9 ( 0) 4121- 47 69 00
sale s@shu ttle.eu
Page 10 20 July 2017
© 2016 by Shuttle Computer Handels GmbH (Germany). All information subject to change without notice. Pictures for illustration purposes only.
Supplied
Accessories
Multi-language Quick Installation Guide
Driver DVD for Windows
VESA mount set (two parts, made of steel, with 6 screws)
2x aluminium stand with screws for vertical operation
Bracket for a 2.5" drive with 8 screws
Power adapter with AC power cord
Environ-
mental Spec
Operating temperature range: 0~40°C [3]
Relative humidity range: 10~90% (non-condensing)
Conformity &
Certifications
EMI: FCC, CE, BSMI, C-Tick
Safety: ETL, CB, BSMI
Other: RoHS, Energy Star, ErP
This device is classed as a technical information equipment (ITE) in class B and is
intended for use in living room and office. The CE-mark approves the conformity by the
EU directives:
(1) 2004/108/EC relating to electromagnetic compatibility (EMC),
(2) 2006/95/EC relating to Electrical Equipment designed for use within certain voltage
limits (LVD),
(3) 2009/125/EC relating to ecodesign requirements for energy-related products (ErP),
(4) 1999/5/EC related to Radio and Telecommunications Terminal Equipment (R&TTE)
[1] How to convert DisplayPort into HDMI/DVI
The DisplayPort outputs can be converted to HDMI or DVI by an additional, passive adapter cable. For example:
DELOCK 82590: 1 m, DisplayPort (male, 20p) to HDMI-A (male, 19p)
DELOCK 82435: 5 m, DisplayPort (male, 20p) to DVI-D (male, 24p)
The integrated graphics automatically detects the connected display and puts out the appropriate electric signal -
either DisplayPort (without an adapter) or HDMI/DVI (with an adapter).
However, a monitor with a DisplayPort connector cannot be connected to the HDMI port with a simple, passive
adapter. In this case an active adapter like Delock 62496 is required.
Connecting a UHD/4K display via the present HDMI port means the refreshing rate is limited to 24 Hz. 60 Hz can only
be achieved by using the DisplayPort port. Should your display have a HDMI 2.0 connector, a refreshing rate of 60
Hz can be achieved by using an active adapter such as the Club 3D CAC -1070 for example.
[2] Audio connector
The 3.5 mm audio jack at the back panel of this device supports both a 4-pole connector for headphones and
microphone and headphones with only a 3-pole connector. Headsets with separate connectors for headphones
and microphone, though, require an appropriate adapter, if also the microphone should be used.
[3] Caution: for high ambient temperatures over 35 °C we strongly recommend to use SSDs (supporting at least 70
°C) instead of hard disks.
[4] Power on after power fail:
The BIOS setup provides a "Power-On after Power Fail" function that can be found under "Power Management
Configuration". This function determines the PC's behaviour after power failure. As a matter of the nature of this
function, it may fail after short power failures. This is why this PC also comes with a hardware-based solution. By
removing Jumper JP1 (please refer to the Quick Installation Guide) the system will start unconditionally once power
is applied.