User's Manual

Page

Next Generation

Signal Enhancement

12. Repeater secured & locked

Any Other Remark/Comment:

Date of Installation: ------------------------ Repeater ID & Site Address: ----------------

Name of the Installer: -----------------------------------------------------

8.8. Dos & Don’t Dos

1. The site should be accessible for maintenance purposes.

2. Arrangement is to be made to avoid unauthorized access to the

repeater.

3. For indoor applications, the housing should be kept away from direct

exposure to the Sunlight & chemical fumes.

4. Stable power supply for repeater unit should be ensured.

5. The route of Cables to/from antennas should be short to minimize the

cable losses and should be free from sharp bends & kinks.

6. There should be adequate separation between antenna system and

power lines to avoid damage to system and humans.

7. Local standard of cabling should be followed.

8. The donor antenna should have proper line of sight with the BTS from

where the signals are to be intercepted for maximum signal strength

and to reduce the effect of fading.

9. The selection of BTS should be made taking other BTSs in the same

vicinity in to consideration to avoid interference.

10. Gain of the repeater should be set after taking antenna isolation in to

consideration.

11. The estimation of coverage area should be confirmed.

12. The system should be made over for normal traffic after actual

measurement of:

a) RF power in the DL

b) RF power in the UL

c) Antenna Isolation

d) Gain settings in DL & UL

13. Feedback regarding performance of the system may be sent to Shyam

Telecom by the user.