User Manual

Page
All Rights Reserved Shyam Telecom Limited 14/42
Next Generation
Signal Enhancement
Figure 4: Login Repeater
Administrator can limit the system access authority of the SUPERVISOR.
II) Configuration
Configuration means setting different repeater parameters for proper
operation. Configuration of Shyam repeaters can be performed locally
with a laptop / PC connected to the repeater by means of local USB
serial interface cable.
Clicking the CONFIGURE on the command bar, displays configure
window. This window allows access to all the configurable repeater
parameters.
 SET : This is for updating the repeater parameters.
 READ : This is for reading configured parameters from repeater.
a) Repeater ID (Figure 5)
User can assign a unique repeater ID to each repeater installed. Up to
10 characters are allowed in this field.
b) Repeater Location (Figure 5)
User can assign the address of location where repeater is installed.
Up to 30 characters are allowed in this field.