User Manual

Page
All Rights Reserved Shyam Telecom Limited 36/42
Next Generation
Signal Enhancement
Figure 17: Display Details of R-20
• The UL Align LED will blink when system is in Uplink Alignment mode.
• The DL Align LED will blink when system is in Downlink Alignment
mode.
• SHUT Down LED will Glow when the system goes out of order due to
(poor isolation) or excessive input signal. The system will check for the
normal state after 30 seconds continuously. If the system senses the
right condition it will be ON automatically and start functioning.
• Downlink RSSI is continuously monitored and level prevailing at a
particular instant is displayed through 8 LED’s.
Clicking in Alarm window can carry out the detail analysis.
8.9. Checklist – Post Installation
Service Band:
Frequency Band (DL):
Frequency Band (UL):
A. Repeater Installation
S.NO. Point(s) To be Verified Remarks
1. Ensure isolation between server and donor
antennas, it has to be 15 dB + Gain set of the
repeater.
2. Actual isolation measured