User Manual
Table Of Contents
- 1. Document History
- 2. Disclaimer
- _
- 3. Safety Instructions and Warnings
- _
- 4. Introduction
- 5. Functional Description Of R4 Band Selective Repeater
- _
- _
- _
- _
- _
- _
- _
- _
- _
- _
- _
- 6. To Get started-Basic Software Control Of the Repeater
- 7. R4 Repeater Specifications
- 8. Installation
- The gain of repeater is set using software control through local USB serial port or optional wireless modem
- 9. System Maintenance
All Rights Reserved Shyam Telecom Limited Page
4/32
Next Generation
Signal Enhancement
WARNING! This equipment complies with FCC & IC radiation exposure limits
set forth for an uncontrolled environment. This transmitter must not be co-
located or operating in conjunction with any other antenna or transmitter.
The unit with server antenna must be installed to provide minimum 2.5 m
separation distance between the server antenna and the body of user or
near by person. The donor antenna used for this transmitter must be fixed-
mounted on outdoor permanent structures with a separation distance of at
least 2.5 meters from all persons during normal operation.
The RF electric performance of the repeater conforms to FCC requirement of
the inter modulation and spurious emission. It avoids interference problems.