Instruction manual

Chapter 1 Basic Operation
CVS-128
1-10 0093112802-00
4
Press the [MENU] to close the menu.
The present set value of frequency (High
frequency or Low frequency) adjusted last is
displayed at the upper left side of menu.
Example:
The High frequency gain is 8.0 H: 8.0.
1.7 Use of [EVENT] key
By pressing the [EVENT] key, three functions of
[Store Position]. [Store Image] and [Fishing hot
spot] are available.
The fishing hot spot is the function to instruct
your boat to navigate easily to a point where you
desire to go back.
[Store pos]: The latitude and longitude of a point
can be stored.
[Store image]: An image of the echo sounder can
be stored in the internal memory.
[Fishing hot sopt]: The WPT navigation starts,
using the latitude and longitude of a point which
is set as a destination by pressing the [EVENT]
key. Simultaneously, the latitude and longitude of
the point can be stored in the destination list.
Caution: Requires position data from GPS
sensor.
Selecting the event
Select the functions when pressing the [EVENT]
key.
1
Press the [MENU] key.
2
Select [System] [EVENT Key set]. (Press
the [ ] key or [ ] key or [ ] key) (See [2.1
How to operate the menu])
3
Press the [ ] key.
4
Change the setting of [EVENT key set].
(Press the [ ] key or [ ] key)
5
Press the [MENU] to close the menu.
Preseting the destination
When you find the school of fish or tide, its
location can be preset as a destination.
(10 locations at maximum)
When presetting the destination, switch [System]
[EVENT Key set] [Store pos]. (See [1.7 Use
of [EVENT] key Selecting the event])
1
In the state that no other key is pressed,
press the [ ] key or [ ] key.
2
Move the cursor (red line) with the [ ] key or
[ ] key to the location to be preset as a
destination.
3
Press the [EVENT] key.
When decided, the red line is drawn at the
designated location on the echo sounder
menu and the latitude and longitude of
designated location are registered in the
destination list.
At this moment, the list number of preset
destination is displayed.
4
When the list of waypoint is full, delete the
list. (See: [2.13 Preset/ WPT edit/ WPT
delete of Destination], [Delete the
destination])
R: M
12.6
V
H: 8.0
EVENT key set
Store pos
Store image
Fishing hot spot
Cursor
(Red line)
L
H