Instruction manual

CVS-128 Chapter 1 Basic Operation
0093112802-00 1-11
5 After a certain time passes, the message
disappears and presetting the destination is
finished.
Caution: When pressing the [EVENT] key,
if [In out] →
→→
→ [NMEA output data] →
→→
→
[TLL] is set to ON, the latitude and
longitude of location above-designated
is output to the navigation system
connected.
Caution: If the destination list is full, the
preset destination list is not deleted,
showing the message that the list is
fully filled.
After a certain time passes, the
message disappears.
Store the image
When you find the schools of fish, its location can
be stored as a destination.
(10 locations at maximum)
When storing the image, switch [NAV] →
[EVENT Key set] → [Store pos]. (See [1.7 Use of
[EVENT] key. Selecting the event].)
1 Press the [EVENT] key.
2 After a certain time passes, the image of
echo sounder presently displayed is stored
and the list number of stored image is
displayed.
3 After a certain time passes, the message
disappears and storing the image is finished.
Caution: If the destination list is fully filled,
the preset destination list is not deleted,
showing the message that the image is
fully filled. After a certain time passes,
the message disappears.
As for deletion and recall of images, see
[2.14 Store/Recall/Deletion of image].
Image data list # 1 is registered
A list of Pic is full.
Registration is not completed.
A Wpt list is full.
Registration is not completed
L H
L H
Waypoint list # 1 is registered
Processing is displayed.
Cursor
(Red line)