Instruction manual

CVS-128 Chapter 2 How to use the menu
0093112802-00 2-7
Setting the alarm
1 Press the [MENU] key.
2 Select your desired alarm from [Alarm 1] or
[Alarm 2]. (See [2.1 How to operate the
menu].)
3 Press the [ ] key.
4 Select the [ON] of alarm you desire. (Press
the [ ] key or [ ] key)
5 If the setting of [Alarm range] is provided in
the alarm desired, select the alarm range.
(See [2.1 How to operate the menu])
6 Change the set value of alarm range.
(Press the [ ] key or [ ] key)
7 Press the [MENU] key to close the menu.
Release the alarm
1 Press the [MENU] key.
2 Select the alarm to be released from
[Alarm 1] or [Alarm 2]. (See [2.1 How to
operate the menu])
3 Press the [ ] key.
4 Select the [OFF] of alarm to be released.
(Press the [ ] key or [ ] key)
5 Press the [MENU] key to close the menu.
Confirm the alarm state
The set state of [Bottom alarm] and [Fish alarm]
can be confirmed on the bar at the right corner
of display. However, when the display is out of
the range, they are not displayed.
When [Water temp alarm], [Speed alarm],
[Arrival alarm] or [EXT alarm] is ON, the
corresponding icon is displayed at the upper
side of the screen.
[
Bottom alarm
]
[
Fish alarm
]
[
Speed alarm
]
[
Arrival alarm
]
[
XTE alarm
]
[ Water temp alarm ]
Adjust
Disp
D.range
Alarm1
Alarm2
NAV
Image
Sonar
System
Bottom alarm
Upper depth
Lower depth
Fish alarm
Position
Range
Level
Return
OFF
5m
50m
OFF
5m
50m
Medium
Adjust
Disp
D.range
Alarm1
Alarm2
NAV
Image
Sonar
System
Water temp alarm
Upper temp alarm
Lower temp alarm
Speed alarm
Speed limit
Arrival alarm
XTE alarm
NAV alarm range
Return
OFF
20.0℃
15.0℃
OFF
0kn
OFF
OFF
10m
Next
Next