Instruction manual

Chapter 5 Installation CVS-128
5-12 0093112802-00
Connection with Speed Sensor or Water Temperature Sensor (Option)
When installing the optional speed sensor or water temperature sensor, connect to the [J6] connector
together with the transducer via the transducer cable (Type: CW-840-0.3M). For wiring, see the figure
below.
After soldering, implement the waterproof and insulation treatment on the connected part with the
self-melting tape.
Structure of Transducer Cable
Connection Table of Transducer
Transducer Cable Transducer
No. of 2 core shield Color of 2 core shield TD-500T-2B
TD-500T-3B
TD-501T-3B
TD-501C
3 Orange Red Black
4 Shield Shield Shield
5 White White White
Connection Table of Speed Sensor and Water Temperature Sensor
Transducer Cable Water Temperature Sensor / Speed Sensor
No, of lead
wire
Color of lead
wire
T-81 ST-80
ST-80-1
ST-90
ST-90-1
ST-100
ST-100-1
1 Blue — Green Green Green
2 Violet — Red Red Red
6 Green Gray White White White
7 Red Gray Brown Brown Brown
8 Black — Shield Shield Shield
2 core shield wire
TD1 (Orange)
TD2 (White)
Shield
SPD.PULSE (Blue)
SPD.VCC (Violet)
SPD.GND (Black)
TEMP.VCC (Green)
TEMP.SIG (Red)
lead wire
To the speed sensor
To the water temperature sensor
To Transducer