Instruction manual

CVS-128 Chapter 5 Installation
0093112802-00 5-13
Connection of External Speaker for Sone-Tone (Prepared by a customer)
The ø3.5 stereo jack is provided to the power cable.
If you connect the speaker with the amplifier to the external, you can clearly hear the sona-tone sound.
Adjust the volume of speaker with the amplifier equipped to the speaker
3.5 stereo jack
Connection of External Monitor (J7) (Prepared by a customer)
When installing an external monitor (VGA monitor, analog RGB input), connect it via CW-576-0.5M. For
its wiring, refer to the illustration below.
After soldering, perform the waterproof and insulation treatment on the junction with a self-fusion tape.
Structure of CW-576-0.5M
Nonuse