User's Manual

1.Packing List
2.Quick Reference Programming Guide
Note that to undertake the following programming the master user must be logged in
Name Quantity Remarks
Keypad
Enter the programming mode
Exit from the programming mode
Change the master code
Add a PIN user
Add a card user
Delete a PIN or a card user
Unlock the door for a PIN user
Unlock the door for a card user
User manual
Φ20mm
×60mm,special for keypad
Φ6mm ×30mm,used for fixing
Φ4mm ×28mm,used for fixing
Φ3mm ×6mm,used for fixing
Please ensure all the above contents are correct.Any missing, please notify the supplier of
the unit.
Screw driver
1
1
1
1
2
2Self tapping screws
Rubber plug
Star screws
999999 is the default factory master code
The ID number is any number between 1 & 2000.
The PIN is any four digits between 0000 & 9999
with the exception of 1234 which is reserved. Users
can be added continuously without exiting programming
mode
1 Read Card #
Cards can be added continuously without exiting
programming mode
Present the card
1 User ID number # PIN #
0 New code # New code #
The master code can be 6 to 8 digits
Master code #
Users can be deleted continuously without exiting
programming mode
2 User ID number # for a PIN user or
2 Read Card # for a card user
Enter the PIN then press #