Operating instructions

ManualsBrandsSICK ManualsHome building and DecorICR890

Chapter 6 Operating Instructions

ICR890 High-end CCD Camera System

Operation

Settings at the ICR890 System for application as stand-alone device without MSC800

Step Entry in the project tree Register tab

Parameter

1. Reading config. Codelabel properties Minimum code position

Maximum code position

Symbol Contrast

2. Reading config. Image capturing properties Digital zoom

Image Resolution

3. Object Trigger Control Start/Stop of Object trigger Control

Start

4. Focus Control Optionen Fokussteuerung Default Position

Focus Control Mode

5. Focus Control Distance Measurement Source MLG

VMS

6. Lamp Control Illumination mode Lamp on

Lamp timeout active

Timeout

7. Position Offsets X-Offset

Y-Offset

Z-Offset

8. Position Coordinates X-Coordinate

Y-Coordinate

Z-Coordinate

Distance to deflecting mirror

9. Position Angles Alpha

Beta

Gamma

10. Increment config. Increment Increment source

Resolution/Speed

11. Image Acquisition Request Request

Image format

Bitmap scaling/JPEG Quality

Activate Diagnosis Output

Output limited by code position

12. 1D Code config. Symbologies Codabar

Code 39

UPC/EAN Familie

2/5 Interleaved

Code 93

Code 128 Familie

13. 2D Code config. Symbologies Data Matrix

PDF 417

14. Data processing Tracking Tracking Mode

Object release point

15. Output Format Output Formating #1/#2

16. Network Architecture Master/Slave Network function

17. Serial Serial Host Interface Output format

Baudrate

Stopbits

Databits/Parity

Hardware

Protocol

Blockcheck

18. Serial Serial Auxilliary Interface Mode

Tab. 6-5: ICR890 System (stand-alone device) without MSC800: Overview of parameters which have to be set