Operating instructions
Chapter 6 Operating Instructions
ICR890 High-end CCD Camera System
88 © SICK AG · Division Auto Ident · Germany · All rights reserved 8011325/0000/2006-10-24
Operation
6.3.6 Changing the device password for the user level "Authorized Client"
The device password for the user level "A
UTHORIZED CLIENT" can be altered device specifically
by the customer. This prevents unwanted or unauthorized changes to the configuration.
1. Establish communication with the device (see Chapter 6.3.2, page 81).
2. In the menu bar under ICR890 select the command P
ASSWORD/CHANGE PASSWORD.
3. Ensure that the user level "A
UTHORIZED CLIENT" has been selected in the dialog window
R
EGISTER.
4. Enter the new password in the field N
EW PASSWORD.
The entry occurs as hidden text.
5. Re-enter the new password in the field C
ONFIRM NEW PASSWORD.
The entry occurs as hidden text.
6. Confirm entries via the L
OGIN button.
A message confirms successful device password changes.
6.4 Default setting
The values of the default setting are permanently saved in the ICR890 System (ROM) and
in the database of the SOPAS-ET Configuration Software in the device-specific jar file (see
Fig. 6-1, page 80). A PC is not required for system startup with the default setting.
6.4.1 Resetting the default setting in the ICR890 System
Prerequisite The SOPAS-ET Configuration Software is connected online to the ICR890 System.
1. In order to completely discard changes to the parameter set, in the menu bar under
ICR890 select the command P
ARAMETER/LOAD FACTORY DEFAULT.
The SOPAS-ET Configuration Software loads the default setting from the database and
displays the parameter values in the register tabs.
2. In the menu bar under E
XTRAS select the command LOGIN TO DEVICE.
3. In the dialog window under U
SERLEVEL in the list box select the entry AUTHORIZED CLIENT
and enter the word “client“ under P
ASSWORD.
Click on OK to confirm the dialog window.
4. In the menu bar under ICR890 select the command P
ARAMETER/SAVE PERMANENT.
The SOPAS-ET Configuration Software transfers the default setting to the permanent
parameter memory (EEPROM) of the ICR890 System.
6.4.2 Default setting MSC800
See MSC800 Operating Instructions (no. 8011540).