Datasheet
FLUID SENSORS | SICK8013162/2017-11-20
Subject to change without notice
3
PRESSURE SENSORS PBS
Detailed technical data
Features
Medium
Liquid, gaseous
Measuring ranges
Gauge pressure 0 bar ... 1 bar up to 0 bar ... 600 bar
Absolute pressure 0 bar ... 1 bar up to 0 bar ... 25 bar
Compound pressure –1 bar ... 0 bar up to –1 bar ... +24 bar
Pressure units
Bar, MPa, psi and kg/cm
2
Process temperature
–20 °C ... +85 °C
Analog signal output and ohmic load R
A
4 mA ... 20 mA (R
A
≤ 0.5 kOhm)
0 V ... 10 V, 3-wire (R
A
> 10 kOhm)
Zero point adjustment
Max. + 3 % of span
Switching output
Transistor switching output PNP or NPN
Number: 1 or 2 (with IO-Link: C/Q
1
: PNP)
Function: normally open/normally closed, windows- and hysteresis function freely adjustable
Contact rating: Supply voltage L
+
– 1 V [V DC]
Max. switching current: 250 mA, with IO-Link: C/Q
1
: 100 mA, Q
2
: 250 mA
Switching delay: 0 s ... 50 s (adjustable)
Response time: ≤ 10 ms
Individually adjustable via external control buttons
Setting accuracy: ≤ 0.5 % of span
Rotatable housing
Display against housing with electrical connection: 330 °
Housing against process connection: 320 °
Display
14-segment-LED, blue, 4-digits, height 9 mm, electronically turnable by 180°
Accuracy: ≤ 1 % of span ± 1 digit
Update: 1,000, 500, 200, 100 ms (adjustable)
Performance
Non-linearity
≤ ± 0.5 %, of span (Best Fit Straight Line, BFSL) according to IEC 61298-2
Accuracy
≤ ± 1 % of the span
Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of
measurement as per IEC 61298-2)
Response time
3 ms
Long-term drift/one-year stability
≤ 0.2 % of the span according to IEC 61298-2
Temperature error
≤ 1.0 % of span typ., ≤ 2.5 % of span max.
Temperature coefcient in rated tempera-
ture range
Mean TC of zero point: ≤ 0.2% of span / 10 K
Mean TC of span ≤ 0.2 % of span / 10 K
Rated temperature range
0 °C ... +80 °C
Service life
Minimum 100 Mio. life cycles
Mechanics/electronics
Process connection
See type code
Wetted parts
Pressure connection: stainless steel 316L
Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel
stainless steel 13-8 PH)
Internal transmission uid
Silicone oil (only with pressure ranges < 0 bar ... 10 bar and ≤ 0 bar abs ... 25 bar abs)
Pressure peak dampening
1)
Through integrated pressure port 0.6 mm or 0.3 mm for process connection G ¼ according
to DIN 3852-E (0.3 mm at and above 10 bar)
1)
Available upon request for process connections G ¼ A according to DIN 3852-E, ¼ “ NPT, R ¼ according to ISO 7, and 7/16”-20 UNF.
2)
Enclosure rating IP per IEC 60529. The enclosure rating classes specied only apply when connected with female connectors that provide the corresponding
enclosure rating.
A
B
C
D
E
F
H
I
J
K
L
M
N
O
P
Q
R
S
T