Datasheet

A
B
C
D
E
F
H
I
J
K
L
M
N
O
P
Q
R
S
T
PBT-RB1X0SG1SSNAMA0Z | PBT
PRESSURE SENSORS
Illustration may differ
Ordering information
Type Part no.
PBT-RB1X0SG1SSNAMA0Z 6038716
Other models and accessories www.sick.com/PBT
Detailed technical data
Features
Medium
Liquid, gaseous
Pressure type
Gauge pressure
Measuring range
0bar... 1bar
Process temperature
0°C... +80°C
Output signal
4mA... 20mA, 2-wire
Specialty
Without design specifics
Performance
Non-linearity
≤ ±0.5%, (Best Fit Straight Line, BFSL) according to IEC61298-2
Accuracy
≤ ±1% of the span
Adjustment accuracy of zero signal
≤ 0.5% of span typ., ≤ 0.8% of span max. (with non-linerarity 0.5%)
Hysteresis
≤0.16% of the span
Non-repeatability
≤0.1% of the span
Response time
<4ms
Signal noise
≤0.3% of the span
Long-term drift/one-year stability
≤0.1% of span to IEC61298-2
Rated temperature range
0°C... +80°C
Service life
Minimum 100Mio. life cycles
Mechanics/electronics
Process connection
G ¼ A according to DIN3852-E
Wetted parts
Pressure Connection: stainless steel 316L
Pressure sensor: stainless steel 316L (for measurement ranges from 0bar... 10bar rel stain-
less steel 13-8 PH)
Internal transmission fluid
Silicone oil (only with pressure ranges < 0bar... 10bar and ≤ 0bar abs... 25bar abs)
Pressure port
Standard
Housing material
Stainless steel 316L
Connection type
Round connector M12x 1, 4-pin, IP67
1)
The pressure transmitter must be supplied with power by a limited energy circuit compliant with 9.3of UL/EN/IEC601010-1 or LPS to UL/EN/IEC60950-1 or Class
2to UL 1310/UL1585 (NEC or CEC). The power supply must be suitable for operation above 2,000m if the pressure transmitter is used above this altitude.
2 FLUID SENSORS | SICK Online data sheet | 2018-12-12 15:38:31
Subject to change without notice