User's Manual

Table Of Contents

RFI341 Radio Frequency Interrogator

3.1.2 Variants

Type Order No. Description

RFI341-1503 1043330 RFI341 13,56MHz basic

RFI341-1503S01 1043981 RFI341; Stainless steel with

integrated Profibus

RFI341-1503S02 1044537 RFI341 with M12 connectivity

RFI341-1503S04 1045449 RFI341 his device complies

with Part 15 of the FCC Rules.

Operation is subject to the

following two conditions:

Additional Filter to be used as

shown in this spec. In case Mux

is used the FCC Version need

to be used.

Splitter 6036000 One (4W) to two (2W) antenna

splitter (passive) ; not for use

with ProfiBus-Version

Multiplexer 6036002 One (4W) to up to 4 Antenna

(each 4W) mulitplexer

Multiplexer FCC 6037325 FCC Version of the mulitplexer

Filter FCC 6037324 Filter to be used in case FCC

Part 15 need to be addressed

Antenna adapter 2046653 Bulgin to BNC antenna

connector converter.

Interface cable

RS232

tbd

M12 to RS232 interface cable

Interface cable Mux

Control

6035859 Control interface between

RFI341 and external multiplexer

3.1.3 System Requirements

The following are required to start up and operate the RFI341:

1. 24V DC mains power source

2. Using external clock pulse (start/stop interval) e.g. via the sensor inputs,

suitable reading pulse sensors for signalling the presence of an object or

the end of a reading/writing interval, e.g., a photoelectric reflex switch are

required.

3. A higher level computer (host system) with a Ethernet or RS232 to run

the PC Demo Software on a PC (Windows XP)

4. A SICK 13.56 MHz antenna, Type RFA3xx

Product Description