User's Manual

Table Of Contents

RFI341 Radio Frequency Interrogator

5.6.3 Connect the RS232 Interface

If the RS-232 interface is intended to be use, e.g for parameterisation with

the SICK software, it needs to be ensured that the Profibus interface

interface is disabled (switch at the CMF, see CMF documentation).

5.6.4 Connect the Profi-Bus Interface

If the Profibus interface should be used than the terminals needs to be

connected. Dependent of the position in a network the terminal resistors

need to be removed. For detailed information please refer to the CMF

gateway documentation (8010461). The max datarate of the Profibus

interface is limited to 1,5Mbit/sec.