User's Manual

Table Of Contents

RFI341 Radio Frequency Interrogator

6.3 Configuration (Parameterisation)

The RFI341 is configured locally in accordance with the existing application.

The read, evaluation and output characteristic, can be parameterised as

required. The factory default settings or the application specific parameter

set is in affect before changes are made.

The RFI341 can be configured by using either the PC Demo Software or the

specific commands sent by the user host software.

6.3.1 Antenna Output Power

The output power of the RFA3xx antennas can be changed in four steps.

When the maximum power is not required to meet the system requirements,

this can be used to prevent reader interference.

(available steps: 4W / 2W / 1W / 0,75W )

6.3.2 RS232 Data Interface

The RS 232 data interface data rate can be set to different speeds. The

RFI341 supports the following settings.

Protocol

Operation