User's Manual

Table Of Contents

RFI341 Radio Frequency Interrogator

6.3.3 Oscillator Switch off delay

Switching off the HF-field results in a power-on reset of all tags present in the

reader field. The length of time set should be checked very carefully. In the

worse case scenario, the tags which are in the selected or quiet mode will

loose this status. Depending on the application, it could be necessary to set

this time to a lower value. The factory default setting is 500 ms.

6.3.4 Read after Write Verify

The interrogator can be set so that it will automatically execute a read after

write if data is written to the transponder. This requires some time and the

user can define whether or not he wants to receive this verification. The

factory default setting is set “ON”.

6.3.5 HF Reset for Inventory Commands

Setting this feature to “ON” results in a HF reset before an inventory

command is executed. The factory default setting is “ON”.

Operation