User's Manual
RFI341 Radio Frequency Interrogator
34 SICK AG − Division Auto Ident - Germany - All rights reserved 8012640/2008-03-10
6.4 ISO/IEC 15693 settings
The ISO/IEC 15693 Standard allows various settings. To configure correctly
for the specific application, it is recommended that the user have a basic
understanding of the features described in this standard. Supported functions
are:
• Changing of the forward link modulation depth. The factory
default setting is 20/100 %
• Changing of the return link modulation type (ASK/FSK). The factory
default setting is FSK.
• Transponder response data rate (high or low). The factory default setting
is high.
• AFI (Application Field Identifier). If this byte is set to 00h, the interrogator
will ignore the AFI, otherwise it will use the set value.
• Inverse UID (start with the LSB instead the MSB). The factory default
setting is reverse byte order.
• One Slot inventory: If this value is set to one, the inventory command will
start with one time-slot.
• Others (refer to document “Telegram Listing RFI341”)
Operation