User's Manual

Table Of Contents

RFI341 Radio Frequency Interrogator

4.2.3 Selecting the Installation Location 22

4.2.4 Brackets 23

5. ELECTRICAL INSTALLATION 24

5.1 Overview of the Installation Steps 24

5.2 Electrical Connections (basic version) 24

5.3 Electrical Connections (M12 connectivity version) 25

5.4 Preparations for Electrical Installation 25

5.4.1 Requirements for the RS-232 HOST interface 25

5.4.2 Requirements for the Profi-Bus interface 25

5.4.3 Main Power supply 26

5.4.4 Connect the RS-232 interface 26

5.4.5 Connecting the “Input 1” Switching Input 27

5.4.6 Connecting the Switching Output 28

5.4.7 Ethernet 28

5.5 Performing Electrical Installation (Basic-Version) 29

5.5.1 Overview of the Connection Procedure 29

5.6 Performing Electrical Installation (Profibus-Version) 29

5.6.1 Overview of the Connection Procedure 29

5.6.2 Connect the earth ground 29

5.6.3 Connect the RS232 Interface 30

5.6.4 Connect the Profi-Bus Interface 30

OPERATION 31

6.1 Overview of the Start-up Steps 31

6.2 Factory Default Settings 31

6.3 Configuration (Parameterisation) 32

6.3.1 Antenna Output Power 32

6.3.2 RS232 Data Interface 32

6.3.3 Oscillator Switch off delay 33

6.3.4 Read after Write Verify 33

6.3.5 HF Reset for Inventory Commands 33

6.4 ISO/IEC 15693 settings 34

7. MAINTANANCE 35

7.1 Maintenance 35

7.2 Disposal 35

8. TROUBLESHOOTING 36

8.1 Installation errors 36

8.2 Electrical Connection Errors 36

8.3 Parameterisation Errors 36