INTRODUC TION When the hallmark of a business is the quality and dependability of its products, there is no time to rest on past accomplishments. In twenty years, we at QuickCar Racing Products have ave seen our product line and our company grow by leaps aps and bounds. In order to continue our success, we remain dedicated to listening to customers’ ideass for new products, saving them em money, and improving the performance and life expectancy tancy of their race cars.
New Products .................................................2-5 Wiring Kits .....................................................6-7 Battery Cable Kits ...........................................8-9 Electrical Accessories .......................................10-11 Ignition System Accessories ..............................12-13 Ignition Control Panels ....................................14-21 Sprint Car Gauge Panels ...................................22-24 Tachometers ....................................
Battery Charging Posts With Mounting Bracket Dual Pickup Distributor Wiring Harness 50-2034 0-2034 Machined aluminum, black anodized brackets offer convenient, remote battery charging access. Predrilled brackets are offered in flat version, for surface mounting, or 90° bent for under panel mounting. Sold complete with (1) red and (1) black battery charging post.
Sprint Gauge Panels 61-6005-1 61-6006 Back Back Easy to mount, lightweight aluminum panels feature QuickCar 2-5/8" diameter oil pressure and water temperature gauges. Deluxe Sprint panel includes a double pole mag switch, low oil pressure warning light and 9-volt battery for self-sufficient power. All panels are sold complete with Quick fasteners.
Fuel Pressure sure Isolator 61-300 61 300 Sleeved Race Spark Plug Wire NEW PRODUC T S Specialized isolator olator eliminates the hazards associated ociated with driver’s compartment tment mounted fuel pressure gauges. uges. Typically mounted to thee engine side firewall, isolator is plumbed with the pressure source on the inlet side and an anti-freeze/water ze/water mix on the outlet, which connects to the gauge.
Aluminum Suspension Tubes Manufactured in the USA from rigid, 6061 aluminum, QuickCar Suspension Tubes are up to 35% stronger than traditional hex or round units. Suspension tubes include precision machined ends, corrosion resistant black anodized finish and identification on the left hand threaded end. Unique design allows easy adjustments by hand or with a wrench. Choose from 1-1/8" O.D. with 5/8" threads, or 1-1/4" O.D. with 3/4" threads. 1-1/8" O.D. - 5/8" Threads 62-150 15" 62-155 15.
QuickCar Racing Products has set the performance racing industry standard for battery cables and wiring. Our finestranded, rope-lay copper construction wire offers the absolute best in current carrying capabilities, while the 220°F.+ insulation can withstand the high temperatures and fluids common to racing. QuickCar offers a complete line of battery cable kits and wiring accessories that are reliable, durable and affordable.
Race Wire Used by many racing teams and chassis builders. Constructed with very fine stranded rope-lay copper wire for high flexibility and superior power flow with insulation capable of withstanding extreme temperatures. 2-Gauge 8-Gauge 57-101 Red, Per Ft. 57-240 Red, Per Ft. 57-102 Red, 125' Roll 57-2401 Red, 10' 57-103 Black, Per Ft. 14-Gauge 57-104 Black, 125' Roll 57-201 Red, Per Ft. 4-Gauge 57-2011 Red, 10' 57-091 Red, Per Ft. 57-203 Black, Per Ft.
Battery Cable Kits QuickCar Battery Cable Kits includes 15 feet of red power cable, 2 feet of black ground cable, one pair of nickel-plated marine style battery terminals, nine gold plated power ring terminals and heat shrink tubing. All battery cables are made from copper.
Side Mount Battery Terminals 57-660 Battery terminals are 24k gold plated for optimum conductivity. Side mount terminals allow you to attach cables to GM style side mount batteries. Comes with nut and lock washers for 5/16" studs. Long stud allows use of multiple or thick power ring connectors. Sold in pairs. 57-610 Top Mount Battery Terminals 57-620 Made from solid brass and 24k gold or nickel plated for optimum conductivity, terminals allow attaching battery cables to top mount batteries.
Battery Quick Disconnects The battery cable quick disconnect enables you to change out a battery fast. Also used for battery charging and anywhere a quick disconnect is helpful. Sold individually, complete with required connectors. Three are generally used; (1) for the battery end, (1) for the car end and (1) for a spare battery or battery charger.
Master Disconnects Most sanctioning bodies require these for an emergency cut-off switch. Our Master Disconnect Switches come complete with a red epoxy-coated handle and mounting plate. Mounting plate is 2-1/2" x 2-1/2".
Ignition Systems QuickCar ignition wiring systems are used by many chassis builders and comply with specifications set by most sanctioning bodies. IGNITION SY STEM ACCESSORIES QuickFire Ignition System 50-212 -212 The QuickFire all-in-one ignition system is simple, mple, affordable and eases the car building process. Fully assembled bled unit features an MSD Digital 6AL ignition with built-in n rev control and Blaster coil for reliable, trouble-free operation.
50-200 Basic Ignition Wiring Harnesses Ready-to-install, basic wiring harnesses ease the car building process. Each harness is 5' long and includes four individually labeled wires complete with plug-in connector. 50-200 Basic Wiring Harness 50-201 Basic Wiring Harness, HEI Mod Ignition Wiring Harness Kit 50-2030 Universal harness for UMP/IMCA modified will connect all ignition components. Includes 50-020 switch panel with weatherproof switches.
Ignition Control Panels QuickCar has become the industry leader in ignition control panels. Panels include bridged double-pole switches, large gauge wiring with heavy duty connectors for improved conductivity and reliability. Panels are pre-wired to connect directly to our wiring harnesses. Ignition Control Panel 50-020 IGNITION CONTROL PANELS Compact ignition panel includes push-to-start button, weatherproof ignition and an accessory switch. Panel is 4-5/8" wide x 2-1/2" high.
50-022 50-023 Ignition Control Panels With Single Accessory Switch 50-022 Ignition Control Panel 50-023 Ignition Control Panel w/Flip Switch Ignition Cover Ignition Control Panel With Two Accessory Switches 50-025 Panel includes ignition switch, push-to-start button, two accessory switches and three pilot lights. Panel is 4-5/8" wide x 4-3/8" high. A direct, plug-in installation using 50-200 or 50-201 wiring harness.
Single Ignition Control Panels Pre-wired switch panels include ignition switch, push-to-start button and choice of single accessory or 3-wheel brake switch. Panels are 4-5/8" wide x 2-1/2" high. A direct, plug-in installation using the 50-2031 wiring harness.
Dual Pickup Distributor Ignition Panel 50-1714 Engineered for cars using a single ignition box and a dual magnetic pickup distributor, or crank trigger/distributor combination. Panel, which is 4-1/8" wide x 3" high, features start, ignition, cross-over and two accessory switches. Pre-wired with a Weather Pack connector for a direct, plug-in installation using 50-2034 wiring harness.
Ignition Control Panel 50-165 Compact ignition panel includes ignition switch, momentary start button and five accessory switches. Panel is 6-7/8" wide x 2" high. FFused Ignition Control Panel 50-163 IGNITION CONTROL PANELS Panel features fused ignition switch, momentary start button and five ffused accessory switches. Panel is 6-7/8" wide x 3-1/4" high. Ignition Control Panel 50-166 Similar to the 50-165 ignition panel, but with the addition of six pilot lights.
Extreme Ignition Control Panels Weatherproof panels include ignition, momentary starter and single accessory switches. Panels are 4-5/8" wide x 2-1/2" high and are a direct, plug-in to the 50-200, 50-201, 50-2021 (dual ignition) or 50-2031 (single ignition) wiring harnesses.
Roll Bar To Switch/Gauge Panel Mounting Brackets IGNITION CONTROL PANEL ACCESSORIES Specialized brackets allow quickly mounting gauge or switch panels to roll bar. Mounts virtually any height panel. Simply snip off any extra bracket length, if desired. Available to mount to 1-1/2", 1-5/8" or 1-3/4" dia. roll bar. Sold in pairs.
Weatherproof Switches 50-401 50-400 50-402 50-415 50-410 50-417 50-400 Momentary Micro Switch 50-401 Momentary-Off-Momentary Single Pole Micro Switch 50-402 Momentary-Off-Momentary Double Pole Micro Switch 50-410 Single Pole Micro Switch 50-415 On-Off-On Micro Switch 50-417 On-On Micro Switch 50-420 On-On Double Pole Micro Switch 50-422 20 Amp Circuit Breaker 50-424 40 Amp Circuit Breaker 50-502 Weatherproof Magneto Micro Switch 50-422 50-424 50-502 HD Switch With Black Switch
NEW Deluxe Sprint Gauge Panels SPRINT C AR G AUGE PANELS Innovative, two-gauge panels feature a self-contained, low oil pressure warning system. Panels are fitted with QuickCar 2-5/8" diameter oil pressure and water temperature gauges, use a 9-volt battery for power, and install with quick fasteners. Choose from lightweight aluminum or ultra-light carbon fiber panels. Sold complete with required fasteners and battery.
61-0604 NEW Rear View 61-0605 Ultra-Nite Sprint Car Gauge Panels Compact, lightweight gauge panels are fitted with Auto Meter 2-5/8" diameter Ultra-Nite glow-in-the-dark oil pressure and water temperature gauges. Gauges are mounted in aluminum or carbon fiber panels using shockproof rubber grommets. Available Deluxe gauge panels include 9-volt battery for self-sufficient power supply for low oil pressure warning light and toggle switch. All panels are sold complete with Quick fasteners.
Offset Sprint Gauge Grommet 61-727 Special rubber grommet secures 2-5/8" diameter gauges into mounting panel, replacing traditional saddle brackets. Offsets gauges toward driver, while reducing gauge vibration for easier reading. Weatherproof Switchh 50-401 Quality momentary-off-momentary tary toggle switch. Commonly used in conjunction ction with an electric motor to activate a wing adjuster.
Tachometers Made in the USA, QuickCar tachometers are used in the assembly of our quality built, ready to install panels, and are also offered separately. Extreme LCD Digital Tachometer 611-7010 Digital tachometer's compact, 2-5/8" diameter allows it to be installed into any Extreme gauge panel. Tachometer may be used simply as an RPM indicator, or as a shift light. RPM settings are adjusted by simply touching the lens with a finger.
Extreme Gauge Panels Extreme Gauge Panels feature lightweight, 2-5/8" diameter white face mechanical gauges with bright red pointers mounted in gloss black finished panels. USA-made panels are pre-wired, ready to install and include necessary senders. No external warning lights are needed; gauges use LED lights and switch automatically from white to designated color when a problem arises. Gauges are mounted using vibration absorbing grommets for added durability.
Extreme Gauge Panels With LCD Digital Tachometer Extreme gauge panels feature the addition of the Extreme LCD Digital Tachometer, which may be used as an RPM indicator or shift light that also includes a recall feature. RPM settings are adjusted by simply touching the lens with a finger. Fully assembled and pre-wired, gauge panels are complete with necessary senders. May be assembled with any combination of gauges; please call with specific requirements.
Standard Gauge Panels Standard gauge panels feature quality QuickCar 2-5/8" diameter mechanical gauges. Panels are sold completely prewired for easy installation and include all necessary senders. 2-Gauge Panel 61-6001 Basic panel includes gauges for oil pressure and water temperature. Panel is 7-1/4" wide x 4-1/2" high. 3-Gauge Panel 61-6011 G AUGE PANELS Panel includes gauges for oil pressure, water temperature and oil temperature. Panel is 10-1/2" wide x 4-1/2" high.
Standard Gauge Panels With 5" Tachometer 2-1 Gauge Panel 61-6031 Basic 2-1 panel includes a 5" diameter QuickCar 10,000 RPM recall tachometer, 2-5/8" diameter mechanical gauges for oil pressure and water temperature, and accompanying warning lights. Panel is 11-7/8" wide x 4-1/2" high.
Standard Gauge Panels With 3-3/8" Tachometers 2-1 Gauge Panel 61-60313 Basic panel includes a QuickCar 3-3/8" diameter 10,000 RPM remote recall tachometer, 2-5/8" diameter mechanical gauges for oil pressure and water temperature, and accompanying warning lights. Panel is 11-7/8" wide x 4-1/2" high.
Standard 2-5/8" Gauges May also be purchased separately. Sold complete with 12-volt lighting. Senders and pressure line not included. Fuel Pressure 611-6000 0-15 PSI. Oil Pressure 611-6003 0-100 PSI. Water Temperature 611-6006 100°-280° F. Oil Temperature 611-6009 100°-340° F. May also be purchased separately. Sold complete with 12-volt lighting. Senders and pressure lines not included. Fuel Pressure ressure 611 611-7000 7000 Volt Meter 611-7007 0-15 PSI.. 8-18 Volts. ts.
Oil Temperature Manifold 61-755 Fuel Pressure Isolator 61-300 Specialized isolator eliminates the he hazards associated with driver’s compartment ment mounted fuel pressure gauges. Typically mounted to the engine side firewall, isolator is plumbed with the pressure source on the inlet nlet side and an anti-freeze/water mix on the outlet, utlet, which connects to the gauge.
Pressure and Temperature Gauge Panel Switches Fuel Pressure Switch 61-730 730 Activates warning light when fuel pressure sure drops below 4 PSI. Switch has 1/8" NPT. Oil Pressure Switches Switches are offered to activate oil pressure warning light at 20 or 30 PSI. Switches have 1/8" NPT. 61-733 Oil Pressure Switch, Activates At 30 PSI 61-735 Oil Pressure Switch, Activates At 20 PSI Water Temperature Switches Activates warning light when water temperature rises to 235° F. Offered with 3/8" or 1/2" NPT.
Gauge Panels With Auto Meter Sport-Comp Gauges Auto Meter's Sport-Comp gauge line is the most popular due to the fact that it combines the benefits of affordability, durability and performance. Gauges feature advanced, air-core meter movement for quicker response, while bold dials with fluorescent red pointers offer exceptional readability, even at the high speeds common to racing.
Gauge Panels With Auto Meter Sport-Comp Gauges (Cont.) Auto Meter Sport-Comp 2-1 Gauge Panel 61-0371 Panel features a 5" diameter 10,000 RPM memory tachometer with recall, 2-5/8" diameter mechanical oil pressure and water temperature gauges, and accompanying warning lights. Panel is 11-7/8" wide x 4-1/2" high.
Gauge Panels With Auto Meter Ultra-Lite Gauges The Ultra-Lite line of gauges weighs less than half the weight of equivalent Sport-Comp gauges, while maintaining the performance and reliability you expect from Auto Meter. Gauges have a clear anodized aluminum bezel, bold numbers and fluorescent red pointers for quick, easy reading. Auto Meter Ultra-Lite 2-Gauge Panel 61-0171 Basic panel includes 2-5/8" diameter mechanical gauges for oil pressure and water temperature, and accompanying warning lights.
Gauge Panels With Auto Meter Ultra-Lite Gauges (Cont.) Auto Meter Ultra-Lite 2-1 Gauge Panel 61-0391 Panel features a 5" diameter 10,000 RPM memory tachometer with recall, 2-5/8" diameter mechanical gauges for oil pressure and water temperature, and accompanying warning lights. Panel is 11-7/8" wide x 4-1/2" high.
Gauge Panels With Auto Meter Pro-Comp Liquid-Filled Gauges Auto Meter's Pro-Comp gauges are top-of-the-line, liquid-filled to dampen vibration and increase gauge accuracy. A black dial face with bright fluorescent red pointer allow quick, easy gauge reading. Auto Meter Pro-Comp 2-Gauge Panel 61-0151 Compact, basic panel includes 2-5/8" diameter mechanical gauges for oil pressure and water temperature, and accompanying warning lights. Panel is 7-1/4" wide x 4-1/2" high.
Gauge Panels With Auto Meter Pro-Comp Liquid-Filled Gauges (Cont.) Auto Meter Pro-Comp 2-1 Gauge Panel 61-0381 Panel combines a 5" diameter 10,000 RPM memory tachometer with recall, 2-5/8" diameter mechanical gauges for oil pressure and water temperature, and accompanying warning lights. Panel is 11-7/8" wide x 4-1/2" high.
Gauge Panels With Auto Meter Ultra-Nite Gauges Auto Meter Ultra-Nite gauges feature blue bezels, glow-in-the-dark white dial faces and bright fluorescent red pointers. Gauges require no electrical power. Auto Meter Ultra-Nite 2-Gauge Panel 61-0601 Basic panel includes 2-5/8" diameter mechanical oil pressure and water temperature gauges, and accompanying warning lights. Panel is 7-1/4" wide x 4-1/2" high.
Gauge Panels With Auto Meter Ultra-Nite Gauges (Cont.) Auto Meter Ultra-Nite 2-1 Gauge Panel 61-0661 Ultra-Nite panel features a 5" diameter 10,000 RPM memory tachometer, 2-5/8" diameter mechanical oil pressure and water temperature gauges, and accompanying warning lights. Panel is 11-7/8" wide x 4-1/2" high.
Gauge Panels With Stewart Warner Deluxe Gauges Stewart Warner Deluxe 2-Gauge Panel 61-2061 Basic panel includes 2-5/8" diameter mechanical gauges for oil pressure and water temperature, and accompanying warning lights. Panel is 7-1/4" wide x 4-1/2" high. Stewart Warner Deluxe 3-Gauge Panel 61-2081 G AUGE PANELS Panel features 2-5/8" mechanical gauges for oil pressure, water temperature and oil temperature, and accompanying warning lights. Panel is 10-1/2" wide x 4-1/2" high.
Quick-Lite Warning Light Kits Warning light kits are designed to immediately alert the driver of any engine problems. Each kit is sold complete with warning light, sending switch and wiring. Oil Pressure Kit 61-711 Kit includes a red warning light, pressure sending unit that actuates the warning light if oil pressure drops below 20 PSI, brass in-line tee for oil pressure line, and necessary pre-terminated wiring.
50-310 Weather Pack Terminals 50-301 A secure, virtually bulletproof wire termination with a waterproof cable seal for connecting ignition or accessories throughout the race car. One through six male and female connectors are available. Rated up to 20A at 12-volt DC. Sold individually.
D Deutsch To Weather Pack Adapter 550-2007 Digital MSD Adapter 50-2006 Pigtail harness adapts the new MSD Digital 6 boxes to a standard 6-pin flat male Weather Pack connector. Wiring adapter eases ses the installation of MSD M HVC ignition boxes, oxes, adapting the t Deutsch square 6-pin connector of the ignition n box to Weather Packk flat fl 6-pin connector.
Tire Pressure Gauges The QuickCar 2-1/2" diameter tire pressure gauge is regarded as the most reliable in the industry. Offered with a choice of Dry, Glo or Liquid-Filled face. High quality gauges feature pressure relief valves, rubber shock rings and 14" long hoses with 45° air chucks and strain reliefs on each end.
Economy Tire Pressure Gauges Economy Ec Digital Tire Pressure Gauge Di 56-070 56 Digital Pocket Tire Pressure Gauge 56-050 EEconomically-priced digital tire pressure ga gauge, which measures 0-100 PSI in 1/2 lb. increments and uses an auto-off feature for inc extended battery life, is more shock resistant ext than analog style gauges. Gauge includes a tha 14" long hose with 45° air chuck and bleeder 14 for quick pressure adjustments.
Aluminum Suspension Tubes CHASSIS COMPONENT S Manufactured in the USA from rigid, 6061 aluminum, QuickCar Suspension Tubes are up to 35% stronger than traditional hex or round units. Suspension tubes include precision machined ends, corrosion resistant black anodized finish and identification on the left hand threaded end. Unique design allows easy adjustments by hand or with a wrench. Choose from 1-1/8" O.D. with 5/8" threads, or 1-1/4" O.D. with 3/4" threads. 1-1/8" O.D.
Torque Absorbers Track-proven to increase forward bite out of the turns with sustained traction down the straight away, QuickCar’s torque absorbers are IMCA-legal, and are lighter than spring style units. CNC-machined units feature internal brass bushing and grease fittings to eliminate any possibility of bind, while the specially-threaded cap allows easy biscuit changes.
Steering Wheels Quality dished aluminum or steel spoked steering wheels are offered with a choice of smooth red, blue or black grips. Choose from 15" or 17" diameter. 15" Steel Steel 68-003 Black 68-0031 Red 68-0032 Blue Aluminum 68-001 Black 68-0011 Red 68-0012 Blue 17" Aluminum STEERING WHEELS & ACCESSORIES Steel 68-004 Black 68-0041 Red 68-0042 Blue Aluminum 68-002 Black 68-0021 Red 68-0022 Blue Steering Wheel Pads Designed to provide driver protection upon impact.
NASCAR Steering Wheel Kill Switch 50-190 NASCAR-legal switch is designed for steering wheel mounting, providing driver the ability to quickly disable electrical system in the event of a crash Hex Hub Button Style Aluminum Disconnect 68-010 STEERING WHEELS & ACCESSORIES Hex hub button style aluminum disconnect. Hex Hub 360° Aluminum Disconnect 68-012 Comes complete with hardware and fasteners. Fine Spline Hub 360° Aluminum Disconnect 68-015 Comes complete with hardware and fasteners.
QuickScale System With Billet illet Pads 56-181 Premium, yet economically-priced scalee system includes many desirable features and is backed by a full 2-year warranty. System includes two full screen displays; one that shows wheel weights, d and another that includes all weights and s. percentages in up to five different modes. m Precision, CNC-machined billet aluminum 15" scale pads offer accuracy within 1/10 of 1%. A built-in RFI filter eliminates possibility of radio frequency interference.
Bump Steer Gauge 56-210 Chassis tool utilizes two gauges and uses a sturdy fixed frame to placee jack on, accurately measuring toe during suspension travel, while allowing for adjustmentss to be made to bump steer. Includes multi-fit plate that fits 5 x 4.5", 5 x 4.75", 5 x 5" and Wide 5 (except snap cap applications). Bump Steer Shim Kit 56-207 Kit Includes One Each: .032", .064", .100", .200", .300" and .500" Shims Multi-Hole Wheel Adapter Plate 56-209 Adapts Wheels With 5 x 4.5", 5 x 4.
Deluxe QuickAngle Tray A replacement for the Smart Tray, the Deluxe QuickAngle Tray has added features including the ability to add a caster/camber gauge adapter, or use the included legs that attach directly to trailing arms, tie rods or chassis tubing, while the two-step base plate accepts the Smart Tool or other similar digital angle finders. Deluxe QuickAngle Tray offers digital, hands-free accuracy and is a great aid when determining angles, or while bending chassis tubing.
Brake Bias Gauge Panels Brake bias gauge panels are fitted with two 1-1/2" diameter, liquid-filled pressure gauges that read from 0-1,000 PSI, allowing driver to track pressure at both the front and rear calipers. Panels include bleeders to evacuate air from the system. Replacement gauge: 611-90 Vertical Mini Brake Bias Gauge 61-101 Vertical design panel is 2-3/4" wide x 4-1/2" high. Horizontal Mini Brake Bias Gauge 61-103 Horizontal design panel is 4-1/2" wide x 2-3/4" high.
Tire prep and selection are key to winning races and QuickCar offers a variety of tools to closely monitor them. Chrome Valve Stems Ch Premium, chrome valve stems are sold each, or four to a card. P 556-115 Chrome Valve Stem, Each 556-116 Chrome Valve Stems, Four To A Card Valve Core Remover 56-119 Compact, pocket-sized tool allows quick valve lve core replacement and valve stem repair.
Tire Management Kit 56-105 All-in-one kit includes deluxe tire durometer (56-155), tire tread depth gauge (56-104) and tire tape (56-110), all in a foam-lined plastic storage case. Monitor tire wear and ensure that your complete tire patch has maximum track contact. Durable, aluminum housed gauge includes professional scale graphics and allows measuring tread depth in 1/32" increments. Sold complete with carrying pouch.
Timing systems include clipboard, choice of two stop watches, (5) qualifying sheets and (5) lap chart sheets, and choice of acrylic or aluminum clipboard. QuickCar acrylic or aluminum clipboard timing systems are visually unique, comfortable to hold, and durable. Dual Timing Systems Dual timing systems are complete with (2) Robic SC505 stop watches, acrylic clipboard, (5) qualifying sheets and (5) lap chart sheets. Choose from systems with red, black, yellow, or white clipboards.
Lap Chart Pads Lap charts are used to record lap times for practice, heat races and feature events. Each pad includes 50 sheets. 51-201 Chassis Set-Up 51-210 Before Race 51-215 After Race 51-230 50-Lap 51-235 100-Lap 51-236 Qualifying Organizer 51-237 Race Day Check List 51-201 51-235 51-215 51-236 TIMING SY STEMS 51-230 51-210 51-237 Clipboards Our clipboards are so easy-to-hold, practical and attractive, that everyone at the track will want one.
Stop Watch 51-004 Precision stop watch features a 20-lap memory that displays lap, splits, fastest, slowest and average lap. Instantly displays previous lap while timing existing lap. Robic SC554 54 Stop Watch 51-027 Stop watch includes 300-lap dual memory, speed, time and number recall. Backlight illuminates entire display. Stop watch includes cludes a 30-lap memory of speed, lap timee and number, while fastest and average ge lap times may be viewed on demand. and.
Sleeved Race Spark Plug Wire Premium quality spark plug wire offers quick energy transfer, less than 40 ohms/ft. of resistance, high EMI (Electro Magnetic Interference) and RFI (Radio Frequency Interference) suppression. Flexible, high strength wire is constructed using a Kevlar core and nickel-copper alloy wound conductor that is covered with two full layers of silicone. Silicone, resulting in a 11.5mm O.D. impregnated fiberglass provides up to 1,400° F. of heat resistance.
Automatic Fan Kit 60-037 Electric fan kit includes an adjustable thermostat, which automatically activates or deactivates fan as needed. Sold complete with 14” diameter fan, thermostat, relay, wiring harness and connectors. Fan is factory pre-set at +/- 200° F., but may be adjusted as desired. Requires a 15-1/2” x 3” mounting area. May be set-up as pusher or puller. Fan may also be purchased separately.
NACA Ducts Designed specifically for ducting air into the car, providing air flow to cool the driver, brakes, rear end cooler, etc. Ducts may be mounted to virtually any flat surface and accept a 3" diameter hose. 60-000 Single Clear 60-003 Single Black 60-010 Dual Clear 60-013 Dual Black 60-015 Helmet Hose Reducer 60-010 60-000 60-003 60-013 60-015 Bumper ducts direct air flow to brakes, preventing overheating and prolonging brake life. Durable and easy to install.
Throttle Linkage Kit 64-162 Kit includes 23" threaded aluminum tube, rod ends, carburetor bushing and return springs. Throttle Stop Brackets C ARBURETOR ACCESSORIES Offered for popular Holley carburetors, rigid, fully CNC-machined black anodized aluminum bracket includes adjustable throttle stop. 64-157 64-1 For Holley 4BBL 64-158 64-1 For Holley 2BBL Throttle Return Spring Kit 65-096 Includes carb mount bracket, (4) return springs and required hardware.
Door Bar Pad 58-210 Closed cell padding offers added driver protection from hard surfaces inside a race car including door bars and seat supports. Pad, which is 36" x 48" in size, may also be used to increase comfort in racing seats. Not fireproof. Roll Bar Padding Leg Guard Heat Shield 60-078 Closed cell foam progressively absorbs shock and increases density as it is compressed. Offset inside diameter allows installing thicker padding toward driver for added protection. Sold in 3' lengths.
Deluxe 5-Point Racingg Harness SAFET Y EQUIPMENT Bolt-in style, 5-point racing harness features heavy duty, forged steel racing ng buckle, 3" wide shoulder and lap belts, and 1" wide antiets stringent SFI submarine belt. Harness meets 16.1 specifications. Optional sternum straps are also available separately. 58-011 Red 58-012 Blue 58-013 Black Arm Restraints 58-020 Designed for use in open cockpit cars, restraints keep arms contained within the car.
Triangle Window Netss Typically used in sprint or midget applications, but may also be used on late models ls or modifieds. 58-047 Red 58-048 Blue 58-049 Black Window Nets Standard, ribbon style window net is 24" x 18" in size. Red 58-042 Blue 58-043 Black 58-034 Yellow 58-035 Orange 58-036 Purple SAFET Y EQUIPMENT Mesh Window Net 58-032 58-041 Mesh style window net increases driver vision, yet stops smaller debris when compared to traditional ribbon-style nets.
Camloc Tool ool 64-262 Impact Crimper 64-020 Tool is designed for crimping standard power rings onto battery cables for a permanent termination. Engineered specifically pecifically for use in the installation of Camloc amloc fasteners. Tire Tape Hawk tip design securely grabs onto virtually any surface and won't pull loose. Includes a magnetic back and measures up to 10'. 56-110 Tire Tape 56-111 Tire Tape, Carded TOOLS Safety Wire 64-015 4-015 Includes 1 lb. of .032" 2" diameter safety wire.
64-076 Pit Sockets The same steel, 1/2" drive sockets used by many top racing teams. Oil Filter Cutter 64-730 64-076 1" Socket, 3-1/4" Long Quickly open oil filters to check for potential engine problems. problems Heavy duty, duty billet aluminum tool features a razor sharp, hardened cutter for an 64-077 Pro 1" Socket, 3-1/4" Long 64-078 Pro 1" Socket, 2-1/4" Long 64-077 extended life.
Plastic Carburetor Hat at 64-145 Carburetor etor Box 64-140 Protect expensive xpensive carburetors from dirt and debris. Ideal for storage or transport, container ner accepts popular Holley 4150/4160 4BBL carburetors and includes a locking lid. d. Cover protects engine when air cleaner has been removed. Hat includes provision to hold eightt spark plugs. Plastic Caps And Plugs 64-225 Pl Commonly used Co to kkeep debris out of spare or stored fuel spa pumps, regulators, pum dry sump pumps, etc..
66-925 Aluminum Coil Clamps Coil Selector Mount 66-914 Anodized aluminum bracket allows mounting of ignition coil directly to firewall or chassis tubing. 66-925 Firewall Mount 66-927 1-3/4" Tube Mount 66-929 1-1/2" Tube Mount Aluminum mount clamps directly to 1-3/4" dia. roll bar tubing and accepts an ignition coil selector. Roll Bar Clamp Reducer 66-908 Vent Clamps Clamp-on breather, ideal for use with transmissions, rear ends, etc. clamps directly to chassis tubing.
Spoiler Supports Rigid, 8" long lightweight aluminum bracket allows precise spoiler angle adjustments. Available spoiler support washers proved an added, professional fit. 66-941 Spoiler Support, Each 66-942 Spoiler Support Washers, Four To A Card Fender Supports With Mounting Bracket 66-950 Fender supports are flexible and resilient. Supports, which are 32" long, spring straight when fender is pulled back out. Sold in pairs, complete with mounting brackets.
Kart Scales 56-300 Engineered specifically for use with go-karts, system features precision, CNC-machined billet aluminum 8" x 10" scale pads. All information is displayed on a single screen with up to five different modes to choose from. Displays weight with up to 1/10 of a pound and a 400 lbs. per pad capacity. Backed by a full 2-year warranty. Kart Adapter 56-333 Ka Specia 5/8"-18 threaded adapter is designed for Special use with the th QuickCar 56-131 caster/camber gauge.
Decals Racing decal is 3" x 11" contingency size. Shirts DEC ALS, SHIRT S AND HAT S Emblazoned with a large QuickCar logo on the back and a small logo on the left front chest, T-shirt is a 90% cotton/10% polyester blend and pre-shrunk. APP-S Small APP-M Medium APP-L Large APP-XL X-Large APP-XXL XX-Large Made from 90% cotton/10% polyester blend and pre-shrunk, polo shirt features the QuickCar logo on the left front chest.
WIRING HARNESS MEASURING GUIDE Please measure the following; measure how the wires will be routed. If possible, sketch a rough drawing of where the parts are mounted in the car using the below illustration. IGNITION BOX TO: Coil: _____ Distributor: _____ Switch panel: _____ Tachometer: _____ www.quickcar.
PRODUC T INDEX A C (Cont.) H A-Arm Shim Kit ............................ 53 Cleco Fasteners............................ 69 Harness Pads ............................... 66 Air Cleaner Spacer Ring ............... 64 Pliers.......................................... 69 Header Wrap ............................... 72 Air Ducts ...................................... 63 Clipboards ................................... 59 Heat Shrink Tubing ....................... 7 Aluminum Jack .........................
O S (Cont.) S (Cont.) Oil Filter Cutter ............................ 69 Starter Solenoid .......................... 11 Tools (Cont.) Oil Temperature Manifold ........4, 32 Jumper Wires ............................ 11 Impact Crimper ..................... 7, 68 Steering Wheel ............................ 50 Oil Filter Cutter ......................... 69 Disconnect ................................ 51 Safety Wire Pliers ...................... 68 Kill Switch..................................
PART NUMBER INDEX 40-100........... 4, 61 40-121........... 4, 61 40-123........... 4, 61 40-125........... 4, 61 40-127........... 4, 61 40-150........... 4, 61 40-181........... 4, 61 40-183........... 4, 61 40-185........... 4, 61 40-187........... 4, 61 40-241........... 4, 61 40-243........... 4, 61 40-245........... 4, 61 40-247........... 4, 61 40-300........... 4, 61 40-350........... 4, 61 40-361........... 4, 61 40-363........... 4, 61 40-365........... 4, 61 40-367........... 4, 61 40-421.......
61-700...............33 61-701...............33 61-702...............33 61-704...............33 61-706...............33 61-709...............33 61-7001 .............26 61-7004 .............22 61-7005 .............22 61-7011 .............26 61-7012 .............26 61-7021 .............26 61-7031 .............27 61-7041 .............27 61-7042 .............27 61-7051 .............27 61-706................ 4 61-710...............32 61-7101 .............32 61-71012 ...........32 61-71024 ...........
TERMS AND CONDITIONS Returns Disclaimer of Warranty To make sure that the item(s) get quickly processed, please follow these simple steps. 1. Call and request an RMA (Returned Merchandise Authorization) number for the merchandise you wish to return. All products must be returned in an unaltered / unchanged state from its original condition. Products must be no older than one year old, or two years old for scales. New parts returned for credit must be completely unaltered, and in new condition.
Someone let the secret out: U.S.A. made QuickCar torque absorbers really do work better than the knockoffs from who-knows-where. That’s because QuickCar torque absorbers feature a bronze bushing and a grease zerk (to reduce bind) that other units simply do not have. These torque absorbers allow many different biscuit combinations to achieve the perfect progressive rate for every situation/driver. 66-499 Torque Absorber QuickCar biscuits have standardized hardness and are also made in the U.S.A.
170 Business Park Drive, Lebanon, TN 37090 1-800-99-SPEED www.quickcar.
