User Manual

Universal Remote Attachment for
Streamline Your Streaming Experience
Universal Remote Attachment for
Roku® streaming players
Roku® streaming devices
Roku 1 | Roku 2 | Roku 3 | Roku 4 | Roku SE | Express | Express+
Premiere | Premier+ | Ultra | Roku® Streaming Stick® | Roku® Streaming Stick®+
Getting Started
1
2
Select your Adapter Clip based on Model, Shape,
and Finish of your Roku
®
remote
On your Sideclick remote, hold down the + buttons simultaneously until the LED
lights solid.
Position your Sideclick remote and the device remote you are learning from on a table, head
to head, approximately 1 inch apart.
Press and release the Sideclick button you wish to program. The LED will start blinking.
Press and hold the button you want it to learn from on your device remote.
-The LED will blink 3 times indicating a successful learn, then will return to solid indicating
you are ready to program other buttons.
-If the LED does not return to solid, a problem in programming has occurred. Exit
programming mode via step 6 and try again.
While LED is on solid, repeat steps 3 & 4 for each button you would like to program.
To exit programming mode, press the + simultaneously and the LED will turn o.
You can also wait approximately 10 seconds and it will exit programming mode
automatically.
Your Sideclick is now ready to use.
Line up tabs on Sideclick remote with keyholes in clip.
Press clip against Sideclick remote and slide clip up until
you hear a click and it locks in place.
Gently pull out on locking tab with index
finger or a pen tip.
While pulling out on the locking tab,
slide clip down and then away from
remote.
1
2
Clip RC
Premier + Ultra (no power button)
ROUND TOP FL AT TO P
Clip RE
Ultra (with power button)
For all other models use the table below
Clip RB
Express Express+ Premier
Roku
®
Streaming Stick
®
(with power button)
Roku
®
Streaming Stick
®
+ (with power button)
Remote Shape
Round Top
Round Top
Flat Top
Flat Top
Remote Finish
Gloss
Matte
Gloss
Matte
Clip ID
RA
RD
RC
RB
Roku Remote
Sideclick
CLIP ID
Select Your Clip
01
Attach Your Clip02
Install Your Remote
03
Program Your Sideclick04
Removing Your Clip05
1
2
1
2
3
4
5
6
7
1
2
• Sideclick Universal Learning Remote
• 2 AAA Batteries
• 5 Adapter Clips
Sideclick products, True Bloom LLC, and any of Sideclick’s or True Bloom LLC’s investors,
are not affiliated with Roku, Inc. or the Roku streaming products as a whole.
What’s Included
Simple Setup
Tips
Insert the included 2 AAA Batteries into your Sideclick Remote.
Select and attach the Adapter Clip that corresponds to your Roku
®
remote
Snap your Roku
®
remote into Adapter Clip.*
Program Sideclick and you’re ready to go.
(Detailed instructions on reverse)
Please visit our website, www.sideclickremotes.com for additional information
including:
• Assembly videos
• Programming videos
• Troubleshooting
• Information on selecting the right Adapter Clip for your streaming remote
• Additional Sideclick products and accessories
• Registering your device
Streamline Your Streaming Experience
1
2
3
4
Easy to Use
Fast Setup
Long Battery Life
Control Multiple Devices
POWER BUTTON
*Some models require a foam spacer (included). If there is a gap between the Roku remote
and the clip or your remote feels loose, see section 3 for foam spacer installation instructions.
If you are using the RB clip and you notice a gap
between the clip arm and the remote, install
the supplied c-shape foam spacer to fill the gap.
Gap
FB Clip
Foam Spacer
Tip 1
Tip 2
If you are experiencing a loose fit between the remote and the clip and you have already
verified that you are using the correct clip, you can install the spare square foam spacer over
the existing foam spacer. This will tighten up the fit and reduce any sliding of the remote.
* Please install the Roku® remote carefully to avoid marring surface.
**
Please note the Sideclick adapter clips will cover the headphone jacks of certain Roku® remotes.