User's Manual
Table Of Contents
- SITRANS LR250 (FOUNDATION FIELDBUS)
- Legal information
- Table of contents
- 1 Introduction
- 2 Safety notes
- 3 Description
- 4 Installing/mounting
- 5 Connecting
- 6 Commissioning
- 7 Remote operation
- 7.1 Operating via AMS Device Manager
- 7.1.1 Functions in AMS Device Manager
- 7.1.2 Key features of AMS Device Manager Rev. 9.0
- 7.1.3 Adding a new device
- 7.1.4 Master Reset
- 7.1.5 Scan Device
- 7.1.6 Sensor calibration
- 7.1.7 Configuring a new device
- 7.1.8 Changing parameter settings using AMS Device Manager
- 7.1.9 Configure/Setup (Level Transducer Block-LTB)
- 7.1.10 Configure/Setup (Liquid Crystal Display Block-LCD)
- 7.1.11 Configure/Setup (Diagnostic Transducer Block-DIAG)
- 7.1.12 Configure/Setup (Resource Block - RESOURCE)
- 7.1.13 Device Diagnostics (Level Transducer Block - LTB)
- 7.1.14 Device Diagnostics (Liquid Crystal Display Block - LCD)
- 7.1.15 Device Diagnostics (Diagnostic Transducer Block - DIAG)
- 7.1.16 Device Diagnostics (Resource Block - RESOURCE)
- 7.1.17 Process Variables (Level Transducer Block - LTB)
- 7.1.18 Password Protection
- 7.1.19 AMS menu structure
- 7.1 Operating via AMS Device Manager
- 8 Parameter reference
- 9 Service and maintenance
- 10 Diagnosing and troubleshooting
- 11 Technical data
- 12 Dimension drawings
- 12.1 Threaded horn antenna
- 12.2 Threaded horn antenna with extension
- 12.3 Flanged horn antenna
- 12.4 Flanged horn antenna with extension
- 12.5 Flanged encapsulated antenna (2"/DN50/50A sizes only)
- 12.6 Flanged encapsulated antenna (3"/DN80/80A sizes and larger)
- 12.7 Threaded PVDF antenna
- 12.8 Threaded connection markings
- 12.9 Raised-Face flange per EN 1092-1 for flanged horn antenna
- 12.10 Raised-Face flange per EN 1092-1 for flanged encapsulated antenna
- 12.11 Flat-Face flange
- 12.12 Process connection tag (pressure rated versions)
- A Appendix A: Technical reference
- B Appendix B: Communications via Foundation Fieldbus
- C Appendix C: Certificates and support
- 13 List of abbreviations
- 14 LCD menu structure
- Glossary
- Index
Remote operation
7.1 Operating via AMS Device Manager
SITRANS LR250 (FOUNDATION FIELDBUS)
110 Operating Instructions, 01/2014, A5E32221411-AB
7.1.14
Device Diagnostics (Liquid Crystal Display Block - LCD)
7.1.14.1
Alarms & Errors (LCD)
Navigate to
Device Diagnostics > LCD > Alarms & Errors
to read Block and Alarm errors. [Errors
displayed are the same for each block (LTB, LCD, DIAG, RESOURCE). See
Alarms & Errors
(LTB) (Page 106) for full listing.]
7.1.15
Device Diagnostics (Diagnostic Transducer Block - DIAG)
7.1.15.1
Alarms & Errors (DIAG)
Navigate to
Device Diagnostics > DIAG > Alarms & Errors
to read Block and Alarm errors.
[Errors displayed are the same for each block (LTB, LCD, DIAG, RESOURCE). See
Alarms &
Errors (LTB) (Page 106) for full listing. See AMS Device Manager instruction manual to work
with alarms and errors.]
7.1.16
Device Diagnostics (Resource Block - RESOURCE)
7.1.16.1
Alarms & Errors (RESOURCE)
Navigate to
Device Diagnostics > RESOURCE > Alarms & Errors
.
Click on
Block Error
tab to open the dialog window to read the following:
Failures
● Input Failure
● Output Failure
● Memory Failure
● Lost Static Data
● Lost Non-Volatile Data
● Readback Check
● Device Fault State
● Block Configuration
● Link Configuration
● Other