User's Manual
Table Of Contents
- 8 Parameter reference
- 9 Service and maintenance
- 10 Diagnosing and troubleshooting
- 11 Technical data
- 12 Dimension drawings
- 12.1 Threaded horn antenna
- 12.2 Threaded horn antenna with extension
- 12.3 Flanged horn antenna
- 12.4 Flanged horn antenna with extension
- 12.5 Flanged encapsulated antenna (2"/DN50/50A sizes only)
- 12.6 Flanged encapsulated antenna (3"/DN80/80A sizes and larger)
- 12.7 Threaded PVDF antenna
- 12.8 Threaded connection markings
- 12.9 Raised-Face flange per EN 1092-1 for flanged horn antenna
- 12.10 Raised-Face flange per EN 1092-1 for flanged encapsulated antenna
- 12.11 Flat-Face flange
- 12.12 Process connection tag (pressure rated versions)
- A Appendix A: Technical reference
- B Appendix B: Communications via Foundation Fieldbus
- C Appendix C: Certificates and support
- 13 List of abbreviations
- 14 LCD menu structure
- Glossary
- Index
Diagnosing and troubleshooting
10.2 General fault codes
SITRANS LR250 (FOUNDATION FIELDBUS)
Operating Instructions, 01/2014, A5E32221411-AB
193
Code/
Icon
Meaning
Corrective Action
S: 99
Prof. Clip Hardware problem. If fault persists contact your local
Siemens representative.
S: 100
Few Shots Hardware problem. If fault persists contact your local
Siemens representative.
S: 101
Meas. Err. Reset configuration. If fault persists contact your local
Siemens representative and provide configuration file and
FB schedule.
S: 102
No Shots Hardware problem. If fault persists contact your local
Siemens representative.
S: 103
Meas. Corrupt Contact your local Siemens representative and provide
configuration file and FB schedule.
S: 104
DMA Error Hardware problem. If fault persists contact your local
Siemens representative.
S: 105
Seq. Corrupt Contact your local Siemens representative and provide
configuration file and FB schedule.
S: 106
Seq. CP Re-install firmware (firmware upgrade). If fault persists
contact your local Siemens representative.
S: 107
Seq. Duration Increase update rate limit. If fault persists contact your local
Siemens representative.
S: 108
BC Corrupt Contact your local Siemens representative and provide
configuration file and FB schedule.
S: 109
BC Start Re-install firmware (firmware upgrade). If fault persists
contact your local Siemens representative.
S: 110
BC Stop Re-install firmware (firmware upgrade). If fault persists
contact your local Siemens representative.