User's Manual
Table Of Contents
- 8 Parameter reference
- 9 Service and maintenance
- 10 Diagnosing and troubleshooting
- 11 Technical data
- 12 Dimension drawings
- 12.1 Threaded horn antenna
- 12.2 Threaded horn antenna with extension
- 12.3 Flanged horn antenna
- 12.4 Flanged horn antenna with extension
- 12.5 Flanged encapsulated antenna (2"/DN50/50A sizes only)
- 12.6 Flanged encapsulated antenna (3"/DN80/80A sizes and larger)
- 12.7 Threaded PVDF antenna
- 12.8 Threaded connection markings
- 12.9 Raised-Face flange per EN 1092-1 for flanged horn antenna
- 12.10 Raised-Face flange per EN 1092-1 for flanged encapsulated antenna
- 12.11 Flat-Face flange
- 12.12 Process connection tag (pressure rated versions)
- A Appendix A: Technical reference
- B Appendix B: Communications via Foundation Fieldbus
- C Appendix C: Certificates and support
- 13 List of abbreviations
- 14 LCD menu structure
- Glossary
- Index
Diagnosing and troubleshooting
10.2 General fault codes
SITRANS LR250 (FOUNDATION FIELDBUS)
194 Operating Instructions, 01/2014, A5E32221411-AB
Code/
Icon
Meaning
Corrective Action
S: 111
BC Duration Hardware problem. If fault persists contact your local
Siemens representative.
S: 112
CPU Fault Hardware problem. If fault persists contact your local
Siemens representative.
S: 113
Data Bus Hardware problem. If fault persists contact your local
Siemens representative.
S: 114
Addr Bus Hardware problem. If fault persists contact your local
Siemens representative.
S: 115
Spur SW Hardware problem. If fault persists contact your local
Siemens representative.
S: 116
Spur HW Hardware problem. If fault persists contact your local
Siemens representative.
S: 117
SV High Verify TB not in simulation mode. If fault persists contact
your local Siemens representative.
S: 118
SV Low Verify TB not in simulation mode. If fault persists contact
your local Siemens representative.