User's Manual
Table Of Contents
- Table of Contents
- SITRANS LR250 Overview
- Specifications
- Installation
- Wiring
- Operating via the handheld programmer
- Operating via SIMATIC PDM
- Functions in SIMATIC PDM
- Quick Start Wizard via SIMATIC PDM
- Changing parameter settings using SIMATIC PDM
- Parameters accessed via pull-down menus
- Operating via AMS Device Manager
- Functions in AMS Device Manager
- Features of AMS Device Manager
- Device Description (DD)
- Configuring a new device
- Startup
- Pull-down menu access
- Device configuration
- Quick Start Wizard via AMS Device Manager
- Maintenance and Diagnostics
- Remaining Device Lifetime [see Remaining Device Lifetime (4.2.) on page 99]
- Remaining Sensor Lifetime [see Remaining Sensor Lifetime (4.3.) on page 102]
- Service Schedule [see Service Schedule (4.4.) on page 105]
- Calibration Schedule [see Calibration Schedule (4.5.) on page 108]
- Electronic Temperature
- Wear (see Wear on page 56)
- Communication
- Security
- Device Diagnostics
- AMS Menu Structure
- Functions in AMS Device Manager
- Parameter Reference
- 1. Quick Start
- 2. Setup
- 3. Diagnostics
- 4. Service
- 5. Communication
- 6. Security
- 7. Language
- Appendix A: Alphabetical Parameter List
- Appendix B: Troubleshooting
- Appendix C: Maintenance
- Appendix D: Technical Reference
- Principles of Operation
- Echo Processing
- Analog Output
- Maximum Process Temperature Chart
- Process Pressure/Temperature derating curves
- Loop power
- Appendix E: Application Examples
- Appendix F: HART Communications
- Appendix G: ATEX Certificates
- Appendix H: Firmware Revision History
- Glossary
- Index
- LCD menu structure
Page 78 SITRANS LR250 (HART) – INSTRUCTION MANUAL 7ML19985JE03
mmmmm
Parameters
Parameter Reference
Parameters are identified by name and organized into function groups. See
LCD menu
structure
on page 165 for a chart
1)
.
Parameters accessible via the handheld programmer are preceded by a number.
Parameters not preceded by a number are accessible only via remote operation.
For more details see:
•
Operating via SIMATIC PDM
on page 40
•
Operating via AMS Device Manager
on page 60
Quick Start Wizard
The Quick Start wizard provides an easy step-by-step procedure to configure the device
for a simple application.
1. Quick Start
1.1. Language
1.2. Material
1.3. Response Rate
1.4. Units
Notes:
• Parameter names and menu structure are almost identical for SIMATIC PDM and the
local user interface (LUI)
1)
.
• Default settings in the parameter tables are indicated with an asterisk (*) unless
explicitly stated.
• Mode toggles between PROGRAM and Measurement Modes.
• For Quick Access to parameters via the handheld programmer, press Home , then
enter the menu number, for example:
2.2.1.
1)
For AMS Device Manager the structure varies slightly.
Notes:
• Do not use the Quick Start wizard to modify individual parameters. (Perform
customization only after the Quick Start has been completed.)
• For access via remote operation see
Quick Start Wizard via SIMATIC PDM
on page
41 or
Quick Start Wizard via AMS Device Manager
on page 63.
• For detailed instructions see
Quick Start Wizard via the handheld programmer
on
page 36.
• In Navigation mode, ARROW keys navigate the menu in the direction of
the arrow.
•Press RIGHT arrow to open Edit Mode, or to save a modification.