User's Manual

Page 52 SITRANS LR 400 – INSTRUCTION MANUAL DRAFT 7ML19985FH01
mmmmm
Parameters (HART)
5. Options
5.1: Enter Code
Input of customer code to enable programmability
The device compares a code number which you enter here with the code number defined
by parameter 5.2. If your entry matches the customer code completely, it releases the
programming lock for all parameters. Any other code number locks and disables
programming.
5.2: Customer Code (F = 0)
Determination of customer code
Here you define the up to four digit long *customer code with which you can protect the
device parameters against undesirable programming errors.
Meaning and parameter of the customer code are explained in “Disabling and enabling
programming” on page 22
5.3: Factory Reset (F = no)
Reset all parameters to factory setting
This parameter allows you to reset all parameters to the original factory setting as
described in “Parameters (HART)” on page 25.
Value
Customer code
Value
up to 4-digit code
Value
yes
no
chap6.fm Page 52 Tuesday, October 9, 2001 2:26 PM