User's Manual

7ML19985FH01 SITRANS LR 400 – INSTRUCTION MANUAL DRAFT Page 25
mmmmm
Parameters (HART)
Parameters (HART)
The parameter groups are followed by the parameters within each group. The parameter
tables show the values you need to enter in bold type, followed by additional information
when necessary. Factory settings are displayed after the parameter name, where
applicable.
Functional Dimensions
Required Parameters
The following parameters are absolutely essential for proper operation of the device.
They apply to all applications and are required to make the system operational.
1. Auto-Setup
Language Local (F = English)
Language of the local user interface
Value
English
Deustch
1 Nozzle height
2 Dead band
3 Raw value
(measured)
4 Level (= calculated
value)
5 Lower range value
6 Lower limit
7 Upper limit
8 Upper range value
9 vessel height
chap6.fm Page 25 Tuesday, October 9, 2001 2:26 PM