User's Manual
Table Of Contents
- Table of Contents
- SITRANS LR 460
- Specifications
- Installation
- Wiring
- 4-20 mA Start Up
- Local Operation
- LCD menu structure
- HART Communications
- Remote operation via PROFIBUS PA
- PROFIBUS PA Profile Structure
- Appendix A: Parameter Descriptions
- 1. Identification
- 2. Input
- 3. Output
- 5. Maintenance settings
- 6. Condensed Status Setup
- 6.1. Condensed Status Mode
- 6.1.1. Loss of Echo S0 (Status; Diagnosis)
- 6.1.2. Cable Fault S1 (Status; Diagnosis)
- 6.1.3. No Tech Power S2 (Status; Diagnosis)
- 6.1.4. Device Lifetime Maintenance Required Limit S3 (Status; Diagnosis)
- 6.1.5. Device Lifetime Maintenance Demanded Limit S4 (Status; Diagnosis)
- 6.1.8. Sensor Lifetime Maintenance Demanded Limit S7 (Status; Diagnosis)
- 6.1.9. Device Service Maintenance Required Limit S8 (Status; Diagnosis)
- 6.1.10. Device Service Maintenance Demanded Limit S9 (Status; Diagnosis)
- 6.1.11. LTB Scale S10 (Status; Diagnosis)
- 6.1.12. Internal Temp Sensor S11 (Status; Diagnosis)
- 6.1.13. Internal Temp High S12 (Status; Diagnosis)
- 6.1.16. AIFB2 PV Range S15 (Status; Diagnosis)
- 6.1.19. Calibration Schedule Maintenance Demanded Limit S18 (Status; Diagnosis)
- 6.1.30. Memory EEPROM S29 (Status; Diagnosis)
- 6.1.31. Memory EEPROM Flags S30 (Status; Diagnosis)
- 6.1.32. Memory Flash S31 (Status; Diagnosis)
- 6.1.33. Ident Violation S32 (Status; Diagnosis)
- 6.1.34. Internal Temperature Calibration S33 (Status; Diagnosis)
- 6.1. Condensed Status Mode
- Appendix B: Technical Reference
- Appendix C: Troubleshooting
- Appendix D: Maintenance
- Appendix E: Software Revision History
- Glossary
- Index
Page 40 SITRANS LR 460 – INSTRUCTION MANUAL 7ML19985JM01
mmmmm
E: LCD menus
5. Maintenance
settings
1. Remaining Device
Lifetime
2. Remaining Sensor
Lifetime
3. Service Interval
4. Calibration Interval
1. Time Elapsed Since Last Service
2. Maintenance Required Limit
3. Maintenance Demanded Limit
4. Maintenance Alert Activation
5. Total Service Interval
6. Units
7. Maintenance Status
8. Acknowledge Status
9. Acknowledge
Service Interval
1. Time Elapsed Since Last Calibration
2. Maintenance Required Limit
3. Maintenance Demanded Limit
4. Maintenance Alert Activation
5. Total Calibration Interval
6. Units
7. Maintenance Status
8. Acknowledge Status
9. Acknowledge
1. Total Device Operating Time
2. Remaining Device Lifetime
3. Maintenance Required Limit
4. Maintenance Demanded Limit
5. Maintenance Alert Activation
6. Total Expected Device Life
7. Maintenance Status
8. Acknowledge Status
9. Acknowledge
Remaining
Device Lifetime
1. Total Sensor Operating Time
2. Remaining Sensor Lifetime
3. Maintenance Required Limit
4. Maintenance Demanded Limit
5. Maintenance Alert Activation
6. Total Expected Sensor Life
7. Maintenance Status
8. Acknowledge Status
9. Acknowledge
Remaining Sensor Lifetime
Maintenance
settings
Calibration Interval