User's Manual

Page 64 SITRANS LR560 (FF) – INSTRUCTION MANUAL 7ML19985LY01
mmmmm
AMS Device Manager
Master Reset (continued)
1) Click the Master Reset button, then click Next to perform a reset.
2) Select the Reset Type:
RESET TYPE RESULT
Factory
Defaults
a)
a)
The only difference between Factory Defaults and Functional reset is that Fac-
tory Defaults resets maintenance parameters, such as device and sensor wear,
calibration and maintenance timers. Functional reset does not reset these
parameters.
Default. Resets all user parameters to the manufacturer’s default
settings. Following this type of reset, complete reprogramming is
required.
Standard
Defaults
Resets all parameters to standard default settings.
Informational
Resets parameters such as Block Descriptor, Strategy, Device
Install Date, Device Message.
Functional
a)
Resets parameters that control device behavior and functionality
(such as Low Calibration Point).
Warm Start Has the same effect as recycling power to the device.
FF Object
Dictionary
b)
b)
FF Object Dictionary reset completes with an automatic power cycle.
Resets all user parameters except for calibration to Factory
Defaults. This option also clears any function block parameters
and device schedule
c)
set by the user.
c)
See the manual Foundation Fieldbus for Level instruments (7ML19985MP01) ,
Data Transmission, for more details.
Master Reset