Installation Guide
Table Of Contents
- RUGGEDCOM WIN5137-V
- Table of Contents
- Preface
- 1. Introduction
- 2. Installing the Subscriber Unit
- 3. Device Management
- 4. Technical Specifications
- 5. Certification
RUGGEDCOM WIN5137-V
Installation Guide
Chapter 4
Technical Specifications
Power Supply Requirements 19
Technical Specifications
This section provides important technical specifications related to the subscriber unit.
CONTENTS
• Section4.1, “Power Supply Requirements”
• Section4.2, “Power Consumption”
• Section4.3, “Radio and Modem Specifications”
• Section4.4, “Operating Environment”
• Section4.5, “Mechanical Specifications”
• Section4.6, “Dimension Drawings”
Section4.1
Power Supply Requirements
The RUGGEDCOM WIN5137-V requires an external power supply that meets the following requirements:
Power Supply Type Class 2
Input Range 10 to 36 VDC
Section4.2
Power Consumption
Typical Power Consumption 12 W
Section4.3
Radio and Modem Specifications
Operating Frequency 3600 to 3800 MHz
Wireless Communication
Standard
IEEE 802.16e-2009
Operating Mode Time-Division Duplexing (TDD)
Channel Bandwidths 3.5 MHz
5 MHz