Installation Guide
Table Of Contents
- RUGGEDCOM WIN5137-V
- Table of Contents
- Preface
- 1. Introduction
- 2. Installing the Subscriber Unit
- 3. Device Management
- 4. Technical Specifications
- 5. Certification
Chapter 5
Certification
RUGGEDCOM WIN5137-V
Installation Guide
24 European Union (EU)
Section5.1.2
European Union (EU)
This subscriber unit is declared by Siemens Canada Ltd to comply with essential requirements and other relevant
provisions of the following EU directives:
• IEC/EN 60950-1
Information Technology Equipment – Safety – Part 1: General Requirements
• EN 301 489-1 (v1.9.2)
Electromagnetic Compatibility and Radio Spectrum Matters (ERM) – Electromagnetic Compatibility (EMC)
Standard for Radio Equipment and Services – Part 1: Common Technical Requirements
• EN 301 489-4 (v2.2.1)
Electromagnetic Compatibility and Radio Spectrum Matters (ERM) – Electromagnetic Compatibility (EMC)
Standard for Radio Equipment and Services – Part 4: Specific Conditions for Fixed Radio Links, Broadband Data
Transmission System Base Stations, Ancillary Equipment and Services
• EN 50121-3-2
Railway Applications – Electromagnetic Compatibility – Rolling Stock – Apparatus
• EN 50121-4
Railway Applications – Electromagnetic Compatibility – Emission and Immunity of the Signaling and
Telecommunications Apparatus
• EN 50155
Railway applications – Electronic Equipment Used on Rolling Stock
Section5.1.3
TÜV Rheinland
This subscriber unit is certified by TÜV Rheinland to meet the requirements of the following standards:
• UL 60950-1:2007 R10.14
Information Technology Equipment – Safety – Part 1: General Requirements
• UL 60950-22:2007 R12.11
Information Technology Equipment – Safety – Part 22: Equipment to be Installed Outdoors
The subscriber unit is marked with a TÜV Rheinland marking and can be used throughout the European
community.
A copy of the TÜV Rheinland Declaration of Conformity is available from Siemens Canada Ltd. For contact
information, refer to “Contacting Siemens”.