User's Guide
Table Of Contents
- RUGGEDCOM SAS-GW
- Table of Contents
- Preface
- 1. Introduction
- 2. Installation and Deployment
- 3. Using RUGGEDCOM SAS-GW
- 4. Configuring RUGGEDCOM SAS-GW
- 4.1. Configuring the Local Time Zone
- 4.2. Configuring the SNMP Read/Write Communities
- 4.3. Managing User Accounts
- 4.4. Managing Base Stations
- 4.4.1. Adding a Base Station
- 4.4.2. Updating a Base Station's Configuration
- 4.4.3. Updating a Base Station's Location
- 4.4.4. Updating a Base Station's Antenna Characteristics
- 4.4.5. Updating SNMP Settings
- 4.4.6. Updating CPI Information
- 4.4.7. Removing a Base Station
- 4.4.8. Viewing Available Base Stations
- 4.4.9. Viewing the Measurements Report
- 4.4.10. Viewing the SAS Registration Information
- 4.5. Managing Subscriber Units
- 5. Monitoring RUGGEDCOM SAS-GW
RUGGEDCOM SAS-GW
User Guide
Chapter 2
Installation and Deployment
Enabling SMS Alerts 13
NOTE
The information defined is sent to the SAS when registering a new base station or subscriber unit.
Parameter Description
User ID The user ID known by the SAS for this installation of RUGGEDCOM SAS-GW.
FCC ID Synopsis: A string 19 characters long
The FCC certification ID for this installation of RUGGEDCOM SAS-GW.
CBSD Manufacturer A unique name for the general CBSD manufacturer.
Call Sign The device identifier provided by the FCC.
Radio Technology The radio access technology used by each CBSD (e.g. LTE, HSPA, WiMAX, etc.). In the
case of RUGGEDCOM WIN products, WiMAX is appropriate.
Supported Specification The latest version of the radio technology standard supported by each CBSD (e.g.
lterel10, ieee802.11ac, etc.).
Sensing Capability A comma separated list of sensing capabilities supported by the CBSDs relavent to the
SAS operation. Examples include, esc and receivedInterferencePower.
SAS URL The URL of the SAS.
3. Click Apply.
Section2.4
Enabling SMS Alerts
RUGGEDCOM SAS-GW can be configured to send SMS (Short Message Service) alerts via text message to a user's
phone or messaging service when specific events (e.g. device not responding, device failed to relinquish, etc.)
occur during operation. This allows users to receive the critical information they need in real time.
SMS alerts require an active account with Twilio's [https://www.twilio.com] SMS service. Twilio offers an easy-to-
use API in a variety of programming languages that allows their customers to quickly create custom SMS services
to suit their unique requirements.
To enable SMS alerts in RUGGEDCOM SAS-GW, do the following:
1. Sign up for Twilio's SMS service and obtain the following information:
• SID
• Token
• Phone number used by the SMS service
For more information, refer to https://www.twilio.com .
2. Log in to RUGGEDCOM SAS-GW. For more information, refer to Section3.1, “Logging In” .
3. Point to Setup and then click Settings. The Update System Configuration screen appears.