User's Guide
Table Of Contents
- RUGGEDCOM SAS-GW
- Table of Contents
- Preface
- 1. Introduction
- 2. Installation and Deployment
- 3. Using RUGGEDCOM SAS-GW
- 4. Configuring RUGGEDCOM SAS-GW
- 4.1. Configuring the Local Time Zone
- 4.2. Configuring the SNMP Read/Write Communities
- 4.3. Managing User Accounts
- 4.4. Managing Base Stations
- 4.4.1. Adding a Base Station
- 4.4.2. Updating a Base Station's Configuration
- 4.4.3. Updating a Base Station's Location
- 4.4.4. Updating a Base Station's Antenna Characteristics
- 4.4.5. Updating SNMP Settings
- 4.4.6. Updating CPI Information
- 4.4.7. Removing a Base Station
- 4.4.8. Viewing Available Base Stations
- 4.4.9. Viewing the Measurements Report
- 4.4.10. Viewing the SAS Registration Information
- 4.5. Managing Subscriber Units
- 5. Monitoring RUGGEDCOM SAS-GW
RUGGEDCOM SAS-GW
User Guide
Chapter 4
Configuring RUGGEDCOM SAS-GW
Updating a Base Station's Location 55
1
6
2
3
4
5
7
8
Figure37:Location Tab
1.Location Latitude Box 2.Location Longitude Box 3.Location Height Box 4.Height Type List 5.Indoor Deployment List
6.Apply Button 7.Delete Button 8.Deregister from SAS Button
3. Update the following parameters as needed:
Parameter Description
Location Latitude Latitudinal position of the base station's antenna in degrees (°), relative to the World
Geodetic System (WGS) 1984 datum.
Location Longitude Longitudinal position of the base station's antenna in degrees (°), relative to the World
Geodetic System (WGS) 1984 datum.
Location Height The height of the base station's antenna above ground level in meters (m).
Height Type Synopsis: { AGL, AMSL }
Default: AGL
Indicates whether the height was measure relative to ground level or sea level. Options
include:
• AGL – Above Ground Level (AGL) indicates the height was measure relative to ground
level
• AMSL – Above Mean Sea Level (AMSL) indicates the height was measure relative to sea
level
Indoor Deployment Synopsis: { False, True }
Default: False
Indicates whether or not the device is operated indoors or outdoors. Options include:
• False – The device is operated outdoors
• True – The device is operated indoors