User's Manual

WiN7000 cBST Installation Procedures | 38
4.3.4 Cable Connections
The following illustration shows the connectors on the lower panel of the WiN7000.
Figure 4-9: Interconnection Panel
Table 4-1: List of Connectors and Cables
No. Design. Connector
Type
Cable Type Function Connected to
1 GND 2 screws
ETSI
#10 AWG bare
copper wire
Grounding Central earth ground,
Tower or pole chassis
2 ANT1 N type
Female
RG 214/U Connected to external antenna
or screw omni-directional
antenna
Antenna
3 GPS TNC
Female
Base Station Synchronization GPS antenna
4 DC + ETH Proprietary WiN
cable
48 VDC/ Return / 5A +
Ethernet Cat5
power supply +
Network/Router/Switch
5 Console 3-pin RS-232 Low level CLI for technicians PC
6 DC + ETH Proprietary WiN
cable
48 VDC/ Return / 5A +
Ethernet Cat5
Optional Multi sector
base station Daisy
Chaining
7 ANT2 N type
Female
RG 214/U Connected to external antenna
or screw omni-directional
antenna
Antenna
1
2
3
4
5
6
7