User's Manual

WiN7000 cBST Equipment Configuration and Monitoring | 50
Note
Entering 1 in the verbose field displays detailed information. Enter 0 to display concise
information.
5.2 Configuring the ASN Gateway
The ASN gateway is the point of access of the base station to the wide area network. Traffic to
and from the base station passes through the ASN gateway.
The ASN gateway also mediates between the base station and the authentication server. It
passes registration requests to the authentication server and returns results to the base
station.
This section explains how to configure the ASN gateway.
1. Under the tools tab select setIPAddr and make sure that the data IP address and the
physical IP address of the ASN gateway are in the same subnet.
2. Select SetOperationMode.
Figure 5-13: SetOperationMode command screen
In OperationMode enter 1 (ASN gateway).
In AsnIpAddress enter the virtual template (IP address) of the ASN gateway (currently
192.168.103.1).
In AutthenticationEnable specify whether you want the ASN gateway to pass requests to
the authentication server.
3. After clicking the Call button, the base station resets itself. Make sure that the reset
procedure has succeeded and that the base station is in working order (the base station
resets itself also after changing the mode from ASN gateway to Standalone).
4. Use the ShowOperationMode command to display the operation details of the ASN
gateway.