User's Manual

WiN7000 cBST cBST WEB Manager | 61
FileUpload Copies a file from the base station’s Flash memory to the
network.
removeSsFromMcastSf Removes an MS from a multicast service flow.
resetFwdStats Resets the forwarding statistics.
Restart Restart the base station.
RunMainPkgFile Software upgrades are supplied in packages containing the
upgrade files and installed on the base station’s flash
memory. This command runs the package defined as
primary package.
RunSecondaryPkgFile Same as RunMainPkgFile but runs the package defined as
secondary.
setFwdPort Configures the setting of the port.
setIpAddr Modifies an IP address assigned with addIpAddress.
setLinkAdaptationDl Configures DL link adaptation.
setMcastPhyDl Sets multicast service flow PHY parameters.
setQosDl Configures downlink QoS.
setQosHRateDl Configures a DL HQoS parameter set.
setQosHrateSsDl Associates an MS to a DL HQoS parameters set.
setQosHrateSsUl Associates an MS to a UL HQoS parameters set.
setQosHRateUl Configures a UL HQoS parameter set.
setQosRedDl Enables and disables the downlink RED and sets the
maximum RED latency.
setQosRedDlProfile Configures the downlink RED drop profile.
setQosShapingDl Enables and disable DL shaping.
SetSecondaryAsMain Switches the definition of the main and secondary base
station software packages. The secondary becomes main
and the main becomes secondary.
showFwdAgeingTimeout Displays entry timeout.
showFwdArEntry Displays the address resolution forwarding entry.
showFwdEntries Displays forwarding entries.
showFwdFilter Displays forwarding filters.
showFwdInterface Displays forwarding interface configuration.
showFwdPort Displays port configuration.