User's Manual

WiN7000 cBST cBST WEB Manager | 88
classifier4
Fourth classifier.
createSnifferFilter
Other tab.
Adds a filter to the sniffer.
Parameters
cid
The CID of the actual connection on which you want to sniff packets. The CID can be any
kind of CID, for example basic CID, primary CID, or data CID.
Integer in the range [0..65535]
error
Specifies whether to sniff only packets with errors.
Integer with the following values:
[ 0 ] Do not sniff only packets with errors.
[ 1 ] Sniff only packets with errors.
type
Specifies whether you want this filter to sniff data or MAC packets.
Enumeration, possible values: [data | mac]. Default value is mac.
mac-filter
Sniffs MAC management packets with the specified type.
Filter, syntax is as follows:
mac-filter=([+-]NAME[*])+
Name: MAC management names, To select from possible string values, perform the
following steps:
1. In the directory /src/cbe, open the file cbeMisc.cc.
2. Search for the following line: Sniffer interface.
3. Select from the MAC filter values in the list.
Example: mac-filter=+DL_MAP-UL_MAP+DCD-UCD
See also IEEE 802.16e-2005, Table 14, for a list of MAC filter string values.
Note: Sequans uses only underscores [_] in MAC filter string values, whereas the IEEE
standard uses underscores and hyphens [-].
Examples:
Sequans: UL_MAP, MOB_NBR_ADV