User's Manual

Installation Procedure

WiN7200 Installation and Setup Guide

3.4.2 Cover Console Port

The Console port is only used for maintenance operations performed by authorized service

personnel and should be closed in normal conditions.

Secure the Console port with both of the (supplied) screws to the port panel. See figure below.

Note: See Appendix C – Console C for Console cable pin out.

3.4.3 Assemble PoE Connector

The DC/Ethernet connector that provides the PoE connection must be assembled as follows:

1. Insert the cap in to the DC/Ethernet port cover, with the as shown below.

2. Insert the PoE cable (not supplied) through the cap and connect it to the supplied J45

connector.

3. Snap the J45 connector into the DC/Ethernet opening.