User's Manual

Installation Procedure

WiN7200 Installation and Setup Guide

3.4.5 Mount the Pico BST

3.4.5.1 Wall Mount

Note: The Pico BST can be attached to any wall that can support the load of the unit.

To mount the unit on the wall

1. Determine the location of the Pico BST mounting bracket and mark the drilling holes on the

wall surface based on the brackets’ four (outer) mounting holes (two at the top and two at

the bottom).

PLAN THE INSTALLATION SO THE INTERFACES FACE DOWN- PROVIDING MORE

PROTECTION AGAINST THE ELEMENTS.

2. Drill the four holes in the wall and align the bracket installation holes with the holes in the

wall. Secure with the appropriate screws and washers (not supplied).

Mounting holes x 4