User's Manual

Installation Procedure
WiN7200 Installation and Setup Guide 24
2. Connect the Data Adapter to a Switch/Router by interconnecting the Data Adapters’
Ethernet port and the Switch/Router 10/100 Base T-port using a Cat5e cable.
3. Connect the Data Adapter to the 110V/220V AC mains using the supplied cable.
I MPORTANT !
B EFORE CONNECTING THE DATA ADAPTER TO THE MAIN OUTLET VERIFY THAT ALL SYSTEM COMPONENTS ARE
PROPERLY INSTALLED . M AKE SURE THAT ALL CABLE CONNECTORS ARE SECURELY POSITIONED IN THE
APPROPRIATE PORTS .
4. Verify that the Data Adapter LEDs, located on the front panel, are Green indicating an OK
status.
Data Adapter LED Indicators
Figure 7: Data Adapter Front Panel
The table below provides a description of the Data Adapter LED indicators.
Table 3. Data Adapter LED Description
LED Color Description
PWR Green Input power is connected
LAN Green LAN link/activity display
Ready Green System ready display