User's Manual
Table Of Contents
- RUGGEDCOM WIN5158-AC-IS
- Table of Contents
- Preface
- 1. Introduction
- 2. Installing the Device
- 2.1. Mounting the Device
- 2.2. Installing the Antenna
- 2.3. Assembling the PoE Cable
- 2.4. Connecting the WIN1010 Data Adapter
- 2.5. Connecting to a RUGGEDCOM RP100 or RP110 (AC Only)
- 2.6. Installing the Device in Hazardous Locations
- 2.7. Grounding the Device
- 2.8. Weatherproofing the Device
- 2.9. Configuring the CPE
- 3. Technical Specifications
- 4. Dimension Drawings
- 5. Certification
Chapter 3
Technical Specifications
RUGGEDCOM WIN5158-AC-IS
Installation Guide
24 Mechanical Specifications
Parameter Range Comments
Ambient Relative Humidity 5% to 95% Non-condensing
Ambient Storage Temperature -40 to 75 °C
(-40 to 167 °F)
Section 3.4
Mechanical Specifications
Parameter Value
Dimensions Refer to Chapter 4, Dimension Drawings
Weight 1.5 kg (3.3 lb)
Enclosure Aluminum
Ingress Protection IP67
Section 3.5
IDU to ODU Cable Specifications
Special 4×2×24 AWG FTP Cat. 5e Outdoor Double Jacket Data Cable UL (1581 VW 1)
IDU to ODU Cable
Applications: Outdoor installations, fixed or portable installations, digital distribution frames in
transmission stations, outdoor installations in harsh environments.
General Construction: Custom made cable designed specially for wireless systems, meeting the requirements of
Cat. 5e per ANSI/TIA/EIA-568-B.2 and IEC 61156-5. The cable contains 4 twisted pairs,
cabled, foil-tape shielded and jacketed with two special black UV resistant, flame retardant
PVC compounds for direct outdoor use in harsh electrical environments. The diameter of the
inner core complies with RJ45 connecting hardware allowing direct connection to equipment
without patch cords.
Conductor Size: 0.52 mm
Outer Jacket Material: UV resistant FR-PVC
Outer Diameter: 7.9 mm nominal
Weight: 68.0 kg/km
IDU to ODU Cable Design and Materials
Conductor Material: Bare copper
Conductor Size: 24 AWG
Insulation Material: Solid PO