User's Manual
Table Of Contents
- RUGGEDCOM WIN7000
- Table of Contents
- FCC Statement and Cautions
- 1. Introduction
- 1.1. About this Guide
- 1.2. Capabilities and Features
- 1.3. Safety Information
- 1.3.1. General
- 1.3.2. Power Supply Requirements
- 1.3.3. Equipment Installation
- 1.3.4. Radio Frequency (RF) Exposure
- 1.3.5. Lightning Protection
- 1.3.6. Power Cord Protection
- 1.3.7. Servicing
- 1.3.8. Antenna Grounding Requirements
- 1.3.9. Outdoor Grounding System
- 1.3.10. User Ports and Power Supply
- 1.3.11. Safety Hazards
- 1.4. WIN7000 Physical Specifications
- 2. Site and Installation Requirements
- 3. Installation Procedures
- 3.1. Pre-Installation Safety Instructions
- 3.2. Package Components and Unpacking
- 3.3. Installation Tools
- 3.4. Installing the Base Station
- 3.5. Weatherproofing
- 3.6. Hazardous Location Information
- 3.7. Hazardous Location Installation
- 4. Setup
- 5. Troubleshooting
- Appendix A. Connector and Cable Pinouts
- Appendix B. WIN7000 Specifications
- Appendix C. List of Acronyms
- Appendix D. Warranty
Chapter 1
Introduction
RUGGEDCOM WIN7000
Installation Guide
6 WIN7000 Physical Specifications
• Contact with AC wiring (power system connection)
WARNING!
To reduce the risk of fire, use only 26AWG or larger telecommunication line cord.
Section 1.4
WIN7000 Physical Specifications
The WIN7000 is packed in a waterproof metal housing. A mounting bracket and mounting kit allows for pole or
wall installation. The assembled unit weighs approximately 15kg.
For information on the WIN7000 wiring connections, see Section 3.4.6, “Power and Cable Connections”.
Figure 3: WIN7000 Dimensions