User's Manual
Table Of Contents
- Contents
- List of Tables
- List of Figures
- 1 Introduction and Important Notes
- 2 Overview
- 3 Planning a HiPath Cordless IP System
- 3.1 Planning According to Call Traffic Load
- 3.2 General
- 3.3 Propagation Conditions for Radio Traffic
- 3.4 Determining the Installation Site
- 3.5 Installing Base Stations
- 4 Putting Into Service
- 5 Installation and Administration
- 5.1 Terminology
- 5.2 Network Concept
- 5.3 Synchronisation over air concept
- 5.4 WBM related issues
- 5.5 Phone related issues
- 5.6 Partition concept of BSIP1
- 5.7 Factory reset of BSIP1
- 5.8 Release notes
- 5.9 Quick Start
- 5.10 Quick start overview
- 5.11 Prepare and connect hardware
- 5.12 Configure BSIP1 for IWU mode
- 5.13 Configuration of VoIP (Infrastructure) network
- 5.14 Configuration of DECT network
- 5.15 Configuration of users at the PBX
- 5.16 Configuration of users at the BSIP IWU
- 5.17 Start system services and register handsets
- 5.18 Configure further BSIP Only to the system
- 5.19 "Quick Start" Completion
- 5.20 Further steps
- 5.21 Configuration reference
- 5.22 WBM overview
- 5.23 Administration
- 5.24 "Network/Gateways" Configuration
- 5.25 "Group" Configuration
- 5.26 Users Configuration
- 5.27 Dect Configuration
- 5.27.1 Configuration Page "Dect - Device"
- 5.27.2 Configuration Page "Dect - Sync"
- 5.27.3 Configuration Page "Dect - ARI"
- 5.27.4 Configuration Page "Dect - About"
- 5.27.5 Configuration Page "Dect - Radio" (Advanced mode)
- 5.27.6 Configuration Page "Dect - Call" (Advanced mode)
- 5.27.7 Configuration Page "Dect - Debug" (Advanced mode)
- 5.27.8 General DECT configuration
- 5.28 Debugging Configuration
- 5.29 "Status" Configuration
- 5.30 "System" Configuration
- 5.31 Configuration Hints for PBXs
- 5.32 HiPath OpenOffice EE
- 5.33 HiPath OpenOffice ME
- 5.34 Troubleshooting / FAQ
- 5.35 Configuration hints for Web Browser
- 6 Technical Data
- 7 Diagnosis and Maintenance
- 8 Open Source Software used in the Product
- Index
c01.fm
Introduction and Important Notes
Data Protection and Data Security
A31003-C1010-S100-2-7620, 08/2010
HiPath Cordless IP, Service Manual 15
1.5 Data Protection and Data Security
This system processes and uses personal data for purposes such as call detail
recording, displays, and customer data acquisition.
In Germany, the processing and use of such data is subject to various regulations,
including those of the Federal Data Protection Law (Bundesdatenschutzgesetz,
BDSG). For other countries, please follow the appropriate national laws.
The aim of data protection is to protect the rights of individuals from being
adversely affected by use of their personal data.
In addition, the aim of data protection is to prevent the misuse of data when it is
processed and to ensure that one’s own interests and the interests of other
parties which need to be protected are not affected.
The customer is responsible for ensuring that the system is installed,
operated and maintained in accordance with all applicable labor laws and
regulations and all laws and regulations relating to data protection, privacy
and safe labor environment.
Employees of Siemens Enterprise Communications GmbH & Co. KG are bound
to safeguard trade secrets and personal data under the terms of the company’s
work rules.
In order to ensure that the statutory requirements are consistently met during
service – whether on-site or remote – you should always observe the following
rules. You will not only protect the interests of your and our customers, you will
also avoid personal consequences.
A conscientious and responsible approach helps protect data and ensure
privacy:
• Ensure that only authorized persons have access to customer data.
• Take full advantage of password assignment options; Never give passwords
to an unauthorized person orally or in writing.
• Ensure that no unauthorized person is able to process (store, modify,
transmit, disable, delete) or use customer data in any way.
• Prevent unauthorized persons from gaining access to storage media, such as
backup CDs or log printouts. This applies to service calls as well as to storage
and transport.
• Ensure that storage media which are no longer required are completely
destroyed. Ensure that no sensitive documents are left unprotected.
Work closely with your customer contact; this promotes trust and reduces
your workload.